VT-HNC100-2-33/N-I-00/000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat VT-HNC100-2-33/N-I-00/000 is part of the VT-HNC Digital Axis Controllers series and is designed for controlling 2 hydraulic axes. It features 11 digital inputs and 2 voltage inputs per axis, with an IP20 protection class and a minimum cycle time of 2 milliseconds. This controller has a transmission rate of 100 Mbit/s full-duplex and supports up to 20 digital outputs.
Internal Product Review
The VT-HNC100-2-33/N-I-00/000 is a digital axis controller for 2 hydraulic axes with IP20 protection. A 2 ms minimum cycle time and 100 Mbit/s full-duplex transmission support fast, stable machine response. PROFINET IO RT Device functionality makes this controller an excellent choice for precise hydraulic motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-2-33/N-I-00/000 belongs to the VT-HNC Digital Axis Controllers series produced by Bosch Rexroth Indramat. It is a dedicated numerical controller for hydraulic motion in industrial automation machinery. Its integrated closed-loop functions regulate the positions and velocities of cylinders or valve-actuated mechanisms, allowing connected equipment to follow programmed motion commands accurately under changing loads.
This model is a version for two hydraulic axes, so it governs exactly two motion channels. Each channel is sampled with a minimum cycle time of 2 ms, supporting responsive control of fast hydraulic movements. Real-time communication with higher-level PLCs uses a full-duplex connection rated at 100 Mbit/s. The controller operates on the network as a PROFINET IO RT device and supports Class A services, including cyclic data exchange and diagnostic reporting. Up to 992 bytes of cyclic I/O can be transferred during each scan, providing capacity for position commands, velocity commands, operating states, and feedback values. Each axis accepts two voltage inputs and two current inputs for analog feedback, while one current output and two voltage outputs provide command signals for external valve electronics.
The local wiring interface provides up to 20 digital outputs for devices such as relays, indicators, and solenoids. Each motion channel also has 11 digital I/O connections per axis for limit switches, homing sensors, start commands, and related machine signals. The IP20 enclosure protects against accidental contact with internal electrical parts but requires installation inside a suitable control cabinet. The controller has no inductive position sensor inside the unit, so position measurements must be supplied through external feedback devices. It operates without a bus extension slot, and cross-axis interpolation must be managed by an external controller because internal axis synchronization is not included. The product is designated as Component Series 3 within the Digital NC control HNC100 product line.
