VT-HNC100-2-30/P-I-00/G02
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901134616
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The VT-HNC100-2-30/P-I-00/G02 from Bosch Rexroth Indramat is part of the VT-HNC Digital Axis Controllers series, designed for heavy industrial environments. This digital axis controller supports up to four closed-loop axes and offers advanced capabilities like synchronization. It weighs 1.2 kg and measures 15 x 17 x 20 cm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-2-30/P-I-00/G02 is an advanced digital controller built for two axes control of position, pressure/force and velocity. It is also able to provide monitoring functions such as cable brake monitoring and dynamic following error monitoring. In the case of any fault, the digital controller communicates an error message and is automatically deactivated. Operators purchasing this product are allowed to define and communicate application-specific data sets through a PC, which is connected to the controller through a serial interface cable. This product's configuration and programming process is done with the help of the WIN-PED PC program, which is installed in the PC unit. PC units used for the configuration of this product should have at least an intel 80286 processor; it should also have a minimum RAM of 8 megabytes, although 16 megabytes is recommended. This PC program also helps operators to carry out diagnostic operations on this controller.
The position control function carried out by the VT-HNC100-2-30/P-I-00/G02 is synchronous, it is also done according to residual voltage principle. The digital axis controller can carry out differential pressure evaluation; it has its own scanning rate. The series connection interface present on this product operates at a transfer rate of approximately 9.6 kilobaud per second; there is also an optional room for PROFIBUS DP, CANopen, and INTERBUS serial connection interface.
The VT-HNC100-2-30/P-I-00/G02 is about 155 millimeters long, and 71 millimeters wide, there is a vibration damper at its front panel to reduce the impact of vibration on its operation. A flash EPROM memory is present on this product; this memory has a capacity of about 1 megabyte. The controller also has its own RAM, which functions as its main memory and has a memory capacity of 256 kilobytes.
Frequently Asked Questions about VT-HNC100-2-30/P-I-00/G02:
Q: How is the configuration of the VT-HNC100-2-30/P-I-00/G02 carries out?
A: The configuration of the VT-HNC100-2-30/P-I-00/G02 is based on the creation of application specific data set on a PC. This data set are then sent to the product through a serial interface.
Q: Can the configuration of the VT-HNC100-2-30/P-I-00/G02 be done on any computer?
A: No. PCs used for the configuration of the VT-HNC100-2-30/P-I-00/G02 must be an IMB PC or compatible system with windows 9x or Windows NT. The processor in the configuration PC must be Intel 80286 or higher.
Q: Is the Configuration software of this product included in its delivery package?
A: No. The PC program WIN-PED is not included in the scope of supply. It can be ordered separately or downloaded free of charge on the internet.
Q: What are the typical fields of application for this product?
A: Applications where the VT-HNC100-2-30/P-I-00/G02 is relevant include presses, Transfer lines, rail bound vehicles and machine tools.
Q: Does the VT-HNC100-2-30/P-I-00/G02 consume a high amount of power during its operation?
A: No. The VT-HNC100-2-30/P-I-00/G02 only consumes about 8 watts of power during operation.
