VT-HNC100-2-30/P-1-00/000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901108539
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-2-30/P-1-00/000 is part of the VT-HNC Digital Axis Controllers series, designed for 2 hydraulic axes and offers 2 voltage and 2 current analog inputs per axis. The controller provides 11 configurable digital inputs and outputs per axis and supports incremental encoders up to 250 kHz frequency with a supply of 5.25 V. It does not feature Ethernet service or bus connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-2-30/P-1-00/000 is a digital axis controller produced by Bosch Rexroth Indramat for the VT-HNC Digital Axis Controllers series. It governs proportional and servo-hydraulic drives by generating position, velocity, and pressure setpoints for two independent hydraulic axes, enabling closed-loop motion tasks in presses, die-casting machines, and testing rigs where coordinated cylinder movement and repeatable force control are required. An inductive position sensor interface is omitted, and the controller operates without any synchronization line to neighboring axes.
Each axis receives 2 voltage and 2 current analog inputs so sensors can be connected without external multiplexers. Voltage channels are buffered by an input resistance of 200 kΩ, while current loops terminate on 350 Ω shunts to produce standardized feedback signals and stable input processing. The unit offers 11 configurable digital I/O points per axis for valve enable, limit switches, or fault signaling, allowing the control logic to exchange discrete machine states directly. Although the hardware supports serial traffic up to 12 MBaud, this version is supplied without a bus connection and has no Ethernet service port. A reference output of +10 V ±25 mV is available for potentiometers or other ratiometric transducers.
Command signals to the actuators are handled by 2 analog output channels per axis, supporting pump control and valve staging in hydraulic circuits that require more than one commanded function. Encoder inputs accept incremental feedback up to 250 kHz, and these lines are powered from a regulated supply of 5.25 V that can source a combined 400 mA for connected feedback devices. For absolute feedback, the SSI port processes word lengths of up to 28 bits, giving high position resolution for demanding hydraulic profiles and accurate position capture. This axis version is intended for two hydraulic loops, allowing the controller to manage dual-cylinder gantries or synchronized clamping units without additional hardware.
Frequently Asked Questions about VT-HNC100-2-30/P-1-00/000:
Q: How many analog input types are supported per axis on the VT-HNC100-2-30/P-1-00/000?
A: The VT-HNC100-2-30/P-1-00/000 controller features 2 voltage and 2 current analog inputs per axis.
Q: What axis configuration is available on the VT-HNC100-2-30/P-1-00/000?
A: This model is designed for controlling two hydraulic axes simultaneously.
Q: How many digital I/O are provided per axis for the VT-HNC100-2-30/P-1-00/000?
A: Eleven configurable digital I/O connections are available per axis for flexible integration.
Q: What is the highest incremental encoder frequency supported by the VT-HNC100-2-30/P-1-00/000?
A: The maximum incremental encoder frequency supported is 250 kHz on this controller.
Q: Does the VT-HNC100-2-30/P-1-00/000 have an Ethernet service interface?
A: This digital axis controller does not include an Ethernet service port.
