VT-HNC100-2-2X-W-16-P-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900724314
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-2-2X-W-16-P-0 belongs to the VT-HNC Digital Axis Controllers series and is designed for managing 2 hydraulic axes. It features 16 digital input and output channels, supports DP Profibus bus connection with a maximum baud rate of 12 MBaud, and uses a 16/32 bit MC68376 processor. The controller has a power consumption of 8 W, measures 106.5 by 155 by 204 mm, and weighs 1.2 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-2-2X-W-16-P-0 digital axis controller is produced by Bosch Rexroth Indramat and belongs to the VT-HNC Digital Axis Controllers series. Designed as a motion and process module for hydraulic machinery, it coordinates position, velocity, and pressure loops so that two independent axes follow programmed setpoints from higher-level PLCs or CNCs. By integrating fieldbus links and onboard signal processing, the unit bridges proportional valve electronics and the supervisory automation system.
For motion tasks, the controller is configured for 2 hydraulic axes, so its firmware and terminal strip support two closed-loop channels. Communication with external controls uses a DP Profibus interface, while sixteen isolated terminals provide 16 input/output points for limit switches or valve solenoids. The processor accepts incremental encoder signals up to 250 kHz, which supports accurate position sampling. Even at full load, the device draws only 8 W, which helps simplify cabinet cooling. The wall-mounted housing measures 106.5 × 155 × 204 mm, leaving room on the rail for relays. A 16/32-bit MC68376 CPU and 8 KB of EEPROM retain parameters when mains power is removed, and no external evaluation electronics are required. It follows the Digital NC control HNC100 hierarchy for parameter management.
The controller includes 1 MB of Flash EPROM for firmware and user programs, while 256 KB of RAM supports fast interpolation during axis control. The SSI port accepts 28-bit words, and the RS-232 service socket runs at 9.6 KBaud for diagnostics. Profibus telegrams move at 12 MBaud, which helps keep axis data synchronized with high-speed PLC cycles. The controller is part of component series 2 and is supplied without an inductive position sensor, so external transducers can be fitted. The unit has a weight of 1.2 kg, allowing direct panel mounting.
Frequently Asked Questions about VT-HNC100-2-2X-W-16-P-0:
Q: How many hydraulic axes does the VT-HNC100-2-2X-W-16-P-0 controller support?
A: The VT-HNC100-2-2X-W-16-P-0 is designed to control two independent hydraulic axes.
Q: How many digital inputs and outputs are available on the VT-HNC100-2-2X-W-16-P-0?
A: This controller features 16 configurable digital inputs and outputs for flexible integration.
Q: Which bus communication protocol is used by the VT-HNC100-2-2X-W-16-P-0 controller?
A: A DP Profibus interface is provided for bus communication with a maximum baud rate of 12 MBaud.
Q: What installation type does the VT-HNC100-2-2X-W-16-P-0 controller require?
A: The VT-HNC100-2-2X-W-16-P-0 requires wall mounting for installation.
Q: What is the power consumption of the VT-HNC100-2-2X-W-16-P-0 controller?
A: This model operates with a power consumption of only 8 watts during use.
