VT-HNC100-1-2X-W-24-P-D Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900978417
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-1-2X-W-24-P-D is part of the VT-HNC Digital Axis Controllers series, designed for 1 hydraulic axis and featuring wall mounting installation. It offers DP Profibus connectivity, a 16/32-bit MC68376 processor, and 24 digital inputs/outputs. The controller has 4 current inputs, 2 current outputs, and weighs 1.2 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-2X-W-24-P-D is a digital axis controller produced by Bosch Rexroth Indramat for the VT-HNC Digital Axis Controllers series. Supplied as the version for one hydraulic axis, the unit operates as the local numeric control point that manages valve currents, evaluates sensor feedback, and communicates motion commands to a hydraulic drive. It combines signal conditioning, real-time processing, and fieldbus interfacing so a PLC or supervisory system can execute closed-loop position or pressure profiles without separate analog cards. This arrangement lets the controller coordinate axis behavior locally instead of relying on separate external signal modules.
A dedicated PROFIBUS-DP interface provides high-speed bus exchange with upstream controls, and the communication link is listed as DP Profibus. Four current measurement channels allow the controller to sample proportional valve or transducer signals, and this feature is listed as 4 current inputs. Two independent actuator drivers are built in, identified as 2 current outputs, to energize servo or proportional valves directly. Internal data handling relies on 256 KB RAM for variables and buffering, while program code and parameter sets are stored in a nonvolatile memory of 1 MB Flash EPROM. Additional analog resources include four voltage inputs, four voltage outputs, four impedance inputs, and a calibrated interface for HR1000 or HR2000 inductive position sensors, giving flexibility for pressure, displacement, or force feedback arrangements.
The discrete side of the controller offers 24 digital I/O points that can be mapped to limit switches, status lamps, or interlocks. Its enclosure measures 106.5 × 155 × 204 mm, which helps it fit inside compact hydraulic power units. The housing weighs 1.2 kg, so panel load remains low. Control logic is executed by a 16/32-bit MC68376 processor, and wall-mounting brackets simplify installation alongside drives or manifold assemblies. This layout supports compact hydraulic cabinets where sensor wiring, valve control, and discrete machine signals must be handled in one location.
Frequently Asked Questions about VT-HNC100-1-2X-W-24-P-D:
Q: How many hydraulic axes can the VT-HNC100-1-2X-W-24-P-D control?
A: This model is designed for controlling a single hydraulic axis.
Q: What type of bus connection does the VT-HNC100-1-2X-W-24-P-D use?
A: The VT-HNC100-1-2X-W-24-P-D supports DP Profibus for bus communication.
Q: How many digital input and output channels are provided on the VT-HNC100-1-2X-W-24-P-D?
A: There are 24 digital inputs and outputs available on this device.
Q: What installation type is specified for the VT-HNC100-1-2X-W-24-P-D controller?
A: Wall mounting is required for installing the VT-HNC100-1-2X-W-24-P-D.
Q: Which inductive position sensors is the VT-HNC100-1-2X-W-24-P-D calibrated to support?
A: This controller is calibrated for use with HR1000 and HR2000 inductive position sensors.
