VT-HNC100-1-2X-W-24-P-C-INK2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900705887
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-1-2X-W-24-P-C-INK2 is part of the VT-HNC Digital Axis Controllers series and is designed for one hydraulic axis with wall mounting installation. It offers 24 digital inputs/outputs, four current input channels, four voltage input channels with a 5 mV resolution, and an encoder max frequency of 250 kHz. The controller has DP Profibus bus connection, a power consumption of 8 W, and weighs 1.2 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-2X-W-24-P-C-INK2 is a digital axis controller produced by Bosch Rexroth Indramat in the VT-HNC Digital Axis Controllers series. It belongs to the Digital NC control HNC100 product series and is delivered as the version for one hydraulic axis, making it suitable for closed-loop position or force regulation on presses, injection machines, and similar installations. The unit integrates motion commands with proportional valves and feedback devices, acting as a compact wall-mounted control node between the hydraulic power stage and a higher-level PLC.
Inside the housing, communication with the fieldbus is provided through Profibus DP, giving deterministic exchange of setpoints and status bits. Signal processing starts with 4 current input channels and 4 voltage input channels, each resolved to 5 mV, while actuation is carried out through 2 current output channels and 4 voltage output channels. A further 24 digital I/O lines cover limit switches and sequencing tasks, and a serial RS-232 link operating at 9.6 KBaud permits local parameterization. The analog section references all measurements to ±10 V ±25 mV, and encoder pulses are accepted up to 250 kHz for high-speed position feedback. The special counter interface supports SSI encoders with data widths up to 28 bits, and the electronics are part of component series 2.
The controller is intended for wall mounting, so the steel enclosure measures 106.5 × 155 × 204 mm, leaving room for convection cooling while keeping cabinet depth modest. Continuous operation draws only 8 W, minimizing thermal load, and the assembled unit weighs 1.2 kg, easing panel installation. Two calibrated IW9 inductive position sensor inputs supplement the analog channels, while the internal counter interface handles position data from SSI devices.
Frequently Asked Questions about VT-HNC100-1-2X-W-24-P-C-INK2:
Q: How many hydraulic axes can the VT-HNC100-1-2X-W-24-P-C-INK2 controller operate?
A: The VT-HNC100-1-2X-W-24-P-C-INK2 supports control of one hydraulic axis as specified by its axis version.
Q: What fieldbus connectivity is available on the VT-HNC100-1-2X-W-24-P-C-INK2?
A: This controller features a DP Profibus bus connection for system integration.
Q: How many digital input and output channels does this controller offer?
A: The device provides 24 digital input and output channels for flexible signal management.
Q: Which inductive position sensors is the VT-HNC100-1-2X-W-24-P-C-INK2 calibrated for?
A: Its inductive position sensor support is calibrated for use with two IW9 sensors.
Q: How is the VT-HNC100-1-2X-W-24-P-C-INK2 installed?
A: The VT-HNC100-1-2X-W-24-P-C-INK2 can be wall mounted for secure installation in control cabinets.
