VT-HNC100-1-2X-W-24-I-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900955333
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-1-2X-W-24-I-0 is part of the VT-HNC Digital Axis Controllers series and is designed for control of a single hydraulic axis. This digital axis controller features 24 digital input and output channels, InterBus S connectivity, and uses a 16/32 Bit MC68376 processor. The device has a power consumption of 8 watts and measures 106.5 x 155 x 204 millimeters, with a weight of 1.2 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-2X-W-24-I-0 is a digital axis controller produced by Bosch Rexroth Indramat within the VT-HNC Digital Axis Controllers series. Designed for closed-loop control of a single hydraulic cylinder or motor, the unit executes position, velocity, and pressure tasks that would otherwise require a dedicated motion card and proportional valve amplifiers. By combining drive functions and fieldbus communications in one metal housing, it provides coordinated motion for presses, die-casting machines, and other electro-hydraulic automation stations.
Its hardware is tailored to 1 hydraulic axis control, so every feedback channel, valve output, and diagnostic routine is arranged for one servo-hydraulic loop. Communication with the higher-level PLC occurs over InterBus S, while local commands or service tasks can be carried out through an RS-232 port operating at 9.6 kbaud. A bank of 24 digital I/O points lets the controller read limit switches and energize solenoids without extra modules. Core processing is handled by a 16/32-bit MC68376 microcontroller, which manages interrupts for position capture, PWM generation, and safety interlocks. Program code and parameters are stored in 1 MB of flash, safeguarding the application during power cycling, and the enclosure size of 106.5 × 155 × 204 mm permits mounting in compact cabinets.
Runtime variables, motion buffers, and diagnostic logs reside in 256 KB of battery-backed RAM, giving ample space for axis state data between cyclic scans. The incremental encoder interface samples edges up to 250 kHz, and the SSI channel accepts words of 28 bits, allowing high-resolution transducers to be used without aliasing. Typical electrical demand is only 8 W, so cabinet ventilation requirements remain low. Heat is further dissipated through wall mounting, which places the 1.2 kg aluminum frame against the panel for conduction. An internal high-side driver delivers up to 50 mA per switch output, providing direct actuation of proportional valve coils or status lamps without interposing relays.
Frequently Asked Questions about VT-HNC100-1-2X-W-24-I-0:
Q: How many axes can the VT-HNC100-1-2X-W-24-I-0 controller manage?
A: The VT-HNC100-1-2X-W-24-I-0 is designed for use with one hydraulic axis.
Q: What is the digital input and output capacity of the VT-HNC100-1-2X-W-24-I-0?
A: This controller features 24 digital inputs and outputs, allowing multiple signal connections.
Q: Which bus system does the VT-HNC100-1-2X-W-24-I-0 support?
A: Bus connectivity for this model is provided by an InterBus S interface.
Q: What installation type is used with the VT-HNC100-1-2X-W-24-I-0 controller?
A: The wall mounting installation type is supported for secure and accessible placement.
Q: How much flash memory is available in the VT-HNC100-1-2X-W-24-I-0 controller?
A: This unit offers 1 MB of flash memory for firmware and program storage.
