VT-HNC100-1-2X-W-24-0-C-INK2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900725834
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-1-2X-W-24-0-C-INK2 is part of the VT-HNC Digital Axis Controllers series and is designed for control of one hydraulic axis. It features 24 digital inputs and outputs, has a wall-mounting housing, and operates with a power consumption of 8 W. The controller is equipped with a MC68376 processor, 256 KB RAM, and weighs 1.2 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-2X-W-24-0-C-INK2 belongs to the VT-HNC Digital Axis Controllers series from Bosch Rexroth Indramat. It is a compact wall-mounted unit designed to command one hydraulic axis inside an electro-hydraulic machine, acting as the local numerical controller that closes position, velocity, and pressure loops. By processing feedback from incremental encoders or inductive sensors, the controller issues finely scaled analog commands to proportional or servo valves, giving OEMs a self-contained platform for motion tasks that do not require a fieldbus interface.
This model supports 24 input/output points, allowing direct wiring of limit switches, pressure transducers, and status lamps without auxiliary modules. Overall power usage stays at only 8 W, so cabinet thermal load is low even during continuous operation. A MC68376 (16/32-bit) CPU executes interpolation routines, while the incremental encoder channel can accept edge frequencies up to 250 kHz; this bandwidth is sufficient for high-resolution glass scales on fast hydraulic slides. The analog drive signal leaves the converter with a granularity of 1.25 mV, enabling smooth valve spool movement and precise metering of hydraulic flow. Because the axis version is limited to a single hydraulic axis and the unit is supplied without a bus connection, all control logic resides locally and communicates through the front-panel I/O and service port.
User programs and configuration tables reside in 1 MB flash EPROM, while real-time variables execute from 256 KB RAM, giving ample space for cam tables and diagnostic buffers. The voltage measurement front end presents a high input impedance of 200 kΩ ±2 %, minimizing sensor loading and noise coupling. With a mass of 1.2 kg, the housing can be mounted on light-gauge panels without reinforcement. The controller also features a two-channel counter interface, an IW9-ready inductive position sensor input, and belongs to component series 2, providing a consistent footprint across successive machine generations.
Frequently Asked Questions about VT-HNC100-1-2X-W-24-0-C-INK2:
Q: How many hydraulic axes does the VT-HNC100-1-2X-W-24-0-C-INK2 controller support?
A: The VT-HNC100-1-2X-W-24-0-C-INK2 controller is designed for managing one hydraulic axis.
Q: How many digital input and output channels are available on the VT-HNC100-1-2X-W-24-0-C-INK2?
A: This controller features 24 digital inputs and outputs.
Q: What is the output resolution of the VT-HNC100-1-2X-W-24-0-C-INK2 controller?
A: The VT-HNC100-1-2X-W-24-0-C-INK2 provides an output resolution of 1.25 mV.
Q: What is the typical power consumption of the VT-HNC100-1-2X-W-24-0-C-INK2?
A: Power consumption for this controller is rated at 8 W during operation.
Q: What type of position sensors are compatible with the VT-HNC100-1-2X-W-24-0-C-INK2?
A: The VT-HNC100-1-2X-W-24-0-C-INK2 is calibrated for use with two IW9 inductive position sensors.
