VT-HNC100-1-1X-220 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900928087
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-1-1X-220 is part of the VT-HNC Digital Axis Controllers series and is designed for controlling one hydraulic axis. It features four current inputs with a range of 4 to 20 mA, four voltage inputs and outputs with a range of ±10 V, and two current outputs in the same 4 to 20 mA range. The controller operates at 18 to 36 VDC with a power consumption of 8 watts and uses a 16/32-bit MC68376 processor.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-1X-220 digital axis controller is manufactured by Bosch Rexroth Indramat for the VT-HNC Digital Axis Controllers series within the HNC100 digital NC control platform. It is configured for one hydraulic axis, allowing position or pressure loops to close for a single cylinder without a separate motion card. In presses, casting machines, or injection units, the controller generates setpoint commands and evaluates feedback signals so the axis follows the programmed NC path.
As a Series 1 component, the module offers analog connectivity matched to typical transducers. Its differential current inputs accept signals in the 4 to 20 mA range, and there are 4 current inputs available for sensors such as pressure transmitters. Actuator commands can be issued on 2 current outputs in the same range to drive proportional valves. For voltage-based devices, the controller provides an input window of ±10 V and routes setpoints to 4 voltage outputs, enabling simultaneous management of servo valves, LVDTs, or position encoders. These channels reduce the need for external signal conditioning and keep wiring straightforward. The specified operating temperature window from 0 to 50 °C maintains full accuracy across normal machine-room environments.
Internally, a 16/32-bit MC68376 microcontroller executes the closed-loop algorithms while communicating diagnostics through the 9.6 kbaud RS-232 service port. Program code and parameter tables reside in 1 MB Flash EPROM, while an additional 8 KB EEPROM stores device-specific calibration data. Working buffers use 256 KB RAM, giving the axis enough space for interpolation and error logging. The controller is powered from 18 to 36 VDC and draws only 8 W, so heat generation remains modest. Four dedicated voltage inputs also capture reference or feedback signals from potentiometers or LVDTs.
Frequently Asked Questions about VT-HNC100-1-1X-220:
Q: What type of axis configuration is supported by the VT-HNC100-1-1X-220 controller?
A: The VT-HNC100-1-1X-220 is designed for use with a single hydraulic axis.
Q: What operating voltage is required for the VT-HNC100-1-1X-220?
A: This controller operates with an input voltage range of 18 to 36 VDC.
Q: How many current input channels does the VT-HNC100-1-1X-220 have and what is their range?
A: The VT-HNC100-1-1X-220 provides four current inputs, each supporting a 4 to 20 mA signal range.
Q: What is the Flash Eprom capacity of the VT-HNC100-1-1X-220 controller?
A: It comes equipped with 1 MB of Flash Eprom for program and data storage needs.
Q: What is the allowable operating temperature range for the VT-HNC100-1-1X-220 controller?
A: The operating temperature range for this model is from 0 to 50 °C, allowing for safe use in many industrial environments.
