VT-HNC100-1-1X-1A0-DFE001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900554779
Ask for AvailabilityThe Bosch Rexroth Indramat VT-HNC100-1-1X-1A0-DFE001 belongs to the VT-HNC Digital Axis Controllers series and is designed for one hydraulic axis. It features a 16/32-bit MC68376 processor and power consumption of 8 watts. The controller offers four current and four voltage inputs, along with memory of 1 MB Flash, 256 KB RAM, and 8 KB EEPROM.
Internal Product Review
The VT-HNC100-1-1X-1A0-DFE001 is a Bosch Rexroth digital axis controller configured for 1 hydraulic axis. The 16/32-bit MC68376 processor and 1 MB Flash memory give the controller stable, responsive performance in closed-loop hydraulic control. A 1.25 mV output resolution supports precise command handling, a strong advantage for accurate axis regulation.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-1X-1A0-DFE001 digital axis controller is produced by Bosch Rexroth Indramat for the VT-HNC Digital Axis Controllers series. This board-level unit is intended to execute closed-loop motion control on electro-hydraulic machinery, driving proportional valves and reading sensor feedback in a single integrated package for coordinated hydraulic control. In an automation cell, it takes over trajectory generation and position regulation for one cylinder, reducing external PLC load and bringing deterministic hydraulic movement to presses, injection equipment, and material-testing stations.
Within the hardware, the axis board is configured for 1 hydraulic axis, and it furnishes four voltage and four current analog inputs. Each current channel presents 100 Ω ±0.2% of input resistance with a resolution of 5 µA, while the voltage channels provide an input resistance of 200 kΩ ±2% and a 5 mV step size. Command outputs are generated with 1.25 mV granularity, and their signal swing is filtered to ±60 mV ripple to keep valve coils stable during operation. A reference span of ±10 V ±25 mV interfaces with standard servo valves, and loads down to 1 kΩ can be driven. The unit has no built-in inductive position sensor, so external displacement transducers must be wired to the incremental input.
Overall consumption remains at 8 W, governed by a 16/32-bit MC68376 processor that works with 1 MB of Flash, 256 KB of RAM, and 8 KB of EEPROM for program storage and user parameters during axis control. The controller counts encoder edges at rates up to 250 kHz and sources or sinks control signals up to ±10 mA per analog output. Communication for setup and diagnostics is available through a RS232 interface fixed at 9.6 kBaud. The controller belongs to component series 1 and relies on external feedback devices for accurate closed-loop operation on hydraulic axes.
