VT-HNC100-1-1X-133-DGM201 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900951060
Ask for AvailabilityThe Bosch Rexroth Indramat VT-HNC100-1-1X-133-DGM201 is part of the VT-HNC Digital Axis Controllers series and features a version for a single hydraulic axis. This controller includes 4 analog input channels with a 5 mV resolution and a maximum input resistance of 200 kOhm. It operates with a supply voltage range of 18 to 36 VDC and is equipped with 1 MB of flash memory and a MC68376 processor.
Internal Product Review
The VT-HNC100-1-1X-133-DGM201 is a digital axis controller for 1 hydraulic axis built around a 16/32-bit MC68376 processor. Four analog input channels and 5 mV analog input resolution support accurate signal handling in demanding hydraulic control tasks. A 250 kHz maximum incremental frequency makes the unit a strong choice for responsive closed-loop performance.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-1X-133-DGM201 is a digital axis controller from Bosch Rexroth Indramat that belongs to the VT-HNC Digital Axis Controllers series. It is configured for one hydraulic axis, so it sends numeric control commands to a single cylinder or motor while monitoring sensor feedback in real time. Designed for cabinet mounting in automated presses, molding machines, and test stands, the device combines signal conditioning, motion control algorithms, and field-level communications so separate PLC analog modules are not required.
The unit has 4 analog input channels, and each channel measures process signals through an input resistance of 200 kΩ with a conversion resolution of 5 mV. Output commands to valves are generated with a granularity of 1.25 mV, and the voltage stage can source or sink up to ±10 mA into loads that do not exceed 500 ohms. Internally, an MC68376 16/32-bit processor runs motion sequences stored in 1 MB of flash memory and uses 256 KB of battery-buffered RAM for variables and diagnostics. Battery-buffered RAM preserves variables and diagnostic information when the supply is removed, which helps retain operating data between power cycles. The controller accepts a reference voltage window of ±10 V ±25 mV, operates from 18 to 36 VDC, and includes a 9.6 kBaud RS-232 service port for parameter transfer and service access.
High-speed feedback is supported through incremental encoder inputs up to 250 kHz and SSI transducers with data words as wide as 28 bits, allowing precise positioning of fast hydraulic axes. This combination supports feedback from common displacement transducers and rotary encoders used on hydraulic motion systems. Power dissipation is limited to 8 W, which helps simplify thermal management inside compact electrical enclosures. The product is part of component series 1 and is identified as a Digital NC control HNC100. Those identifiers distinguish it within the controller range and support selection of compatible expansion hardware.
