VT-HNC100-1-1X-130-SEK001 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900924158
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-1-1X-130-SEK001 is part of the VT-HNC Digital Axis Controllers series and is designed for controlling one hydraulic axis. It features EtherNet/IP bus connection, supports 24 digital inputs and 24 digital outputs, and provides 4 analog inputs and 4 analog outputs. The operating voltage range is 18 to 36 VDC and the controller functions include speed and torque command capabilities.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-1-1X-130-SEK001 digital axis controller is produced by Bosch Rexroth Indramat within the VT-HNC Digital Axis Controllers series. Designed for closed-loop hydraulic motion, this unit governs one servo-hydraulic axis and links directly to proportional valves and pressure transducers. In an automation cell, the controller provides programmable numeric control so a machine PLC can offload motion processing while maintaining deterministic positioning. This arrangement lets the hydraulic axis respond to command changes while the main controller manages broader machine logic.
Its supply electronics operate from 18 to 36 VDC, a range that lets the controller share low-voltage power with typical cabinet I/O. The permissible ambient operating range of 0 to +50 °C suits most enclosed machinery without extra conditioning. Communication to higher-level controls is handled through an EtherNet/IP bus connection, enabling real-time command and diagnostic exchange. For field signals, the unit provides analog inputs in a 4 Diff + 4 Impedance arrangement and 24 digital inputs. These inputs can be used for valve position feedback, pressure setpoints, limit switches, and safety interlocks. The DSP handles speed control, torque command processing, and a fast internal torque loop, while two plug-in sensor evaluation modules support LVDT or SSI feedback when required.
The controller furnishes analog outputs in a 2 voltage/current + 2 voltage arrangement for proportional valve drive and reference cascades, and it also offers 24 digital outputs for valve enable lines and status bits. Configuration data is written to EEPROM, so parameters remain stored after power is removed. Persistent storage helps the controller return with the same settings after routine power interruptions. A permitted storage window of -20 to +70 °C protects the electronics during transit and downtime. The device belongs to component series 1, includes two sensor evaluation module slots, and is supplied in the axis version for 1 hydraulic axis. If an inductive position sensor is not present, the corresponding evaluation channel is disabled and the controller continues closed-loop control with external feedback.
Frequently Asked Questions about VT-HNC100-1-1X-130-SEK001:
Q: What type of bus connection is available on the VT-HNC100-1-1X-130-SEK001 controller?
A: This controller supports EtherNet/IP bus connection for communication with other devices.
Q: How many digital inputs are available on this digital axis controller?
A: The VT-HNC100-1-1X-130-SEK001 provides 24 digital inputs for extensive device interfacing.
Q: What is the allowable ambient temperature range for the VT-HNC100-1-1X-130-SEK001?
A: This unit supports an ambient temperature range from 0 to +50 °C.
Q: How many and what type of analog inputs are present on this model?
A: The controller features 4 differential and 4 impedance analog inputs for flexible signal handling.
Q: What control functions are implemented in the VT-HNC100-1-1X-130-SEK001 controller?
A: The control functions include speed control, torque command, and a torque loop.
