The VT-HNC100-1-14-134 complies with EC Directives. It meets all the specific requirements to control hydraulic drives and electric drives. The operation of the VT-HNC100-1-14-134 varies based on creation of specific data sets. Once the data sets are generated on a PC, they are sent to the VT-HNC100-1-14-134 via serial interface. After the data sets are sent to the digital axis control the program sequences and settings are optimized on machine.
The VT-HNC100-1-14-134 has 8, 16, or 24 digital inputs and outputs each. The configuration of field buss interfacing is facilitated by WIN-PED 5 Bus Manager. The WIN-PED 5 is used for setting, programming and diagnostics of the VT-HNC100-1-14-134
The system requirements for the VT-HNC100-1-14-134 are as follows:
RAM (recommended: 256 MB)
IBM PC or compatible system
60 MB free hard disk space
Windows 2000 or Windows XP
While operating the VT-HNC100-1-14-134 you should not use all the channels simultaneously. A pin is usually provided with the current inputs and the voltage inputs so that either the current input or the in voltage input can be used at one time. The current is looped usually through various current measuring devices. If you are not using the current measuring devices, you should plug jumper from “Iin” to pin “analog_GND“.
The VT-HNC100-1-14-134 is designed to be integrated into a system or machine or assembled with the components to form a system or machine. The VT-HNC100-1-14-134 is for open and closed-loop control of position, velocity or pressure of electrodydraulic axes.
Below are the possible interfaces to the VT-HNC100-1-14-134 for higher level control.
Field bus systems (PROFIBUS DP, CANopen, INTERBUS-S)
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned
or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized
distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands
appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved