VT-HNC 100-1X-160 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900548787
Ask for AvailabilityThe Bosch Rexroth Indramat VT-HNC 100-1X-160 is part of the VT-HNC Digital Axis Controllers series and supports 4 current inputs and 4 voltage inputs, each with ranges of 4 to 20 mA and -10 to +10 V respectively. This unit features a 16/32-bit MC68376 processor, 1 MB of flash memory, 256 KB of RAM, and operates with an input voltage of 18 to 36 VDC.
Internal Product Review
The VT-HNC 100-1X-160 is a digital axis controller with an 18 to 36 VDC operating voltage and low 8 W internal power demand. Four voltage inputs and four voltage outputs support precise analog interfacing for demanding motion applications. A 16/32-bit MC68376 processor and 1 MB flash memory give the controller fast, dependable axis control.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC 100-1X-160 is a digital axis controller produced by Bosch Rexroth Indramat in the VT-HNC Digital Axis Controllers series. Intended for machine tools, presses, and handling systems, it receives sensor feedback, executes closed-loop algorithms, and issues analog commands that position a single hydraulic or electric axis with consistent speed and force. In industrial automation, this module bridges the PLC layer and the proportional valve or drive amplifier, offloading motion regulation from the central controller. Because the control loop runs in the module, the host PLC can focus on sequence logic while the axis controller handles fast corrections from changing sensor signals.
The controller operates from 18 to 36 VDC and uses a 16/32-bit MC68376 microprocessor for cycle execution. Four differential voltage inputs accept command or feedback signals across -10 to +10 V, and another four current inputs monitor transducers in the industrial 4 to 20 mA loop. Actuation interfaces provide four voltage outputs with the same signal range and current drivers that duplicate the 4 to 20 mA span for valve coils. Axis parameters are retained in 1 MB of flash memory alongside 8 KB of EEPROM, so configuration persists across power cycles without external storage. The combination of analog signal handling and onboard memory supports self-contained axis regulation in distributed machines.
The axis computer dissipates 8 W internally, and its 256 KB of RAM supplies working buffers for trajectory generation and diagnostic logging. Two current outputs, reflected in the dedicated 2-channel count, energize proportional amplifiers, while four voltage outputs transmit reference values to drives that use voltage control. This arrangement allows the controller to operate valve electronics and voltage-controlled amplifiers from the same housing. Reliable service is specified between 0 to 50 °C, and safe storage is permitted from -20 to +70 °C.
