SYHNC100-NIB-2X/W-24-P-D-E23-A012 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
16 Seconds
The Bosch Rexroth Indramat SYHNC100-NIB-2X/W-24-P-D-E23-A012 is part of the VT-HNC Digital Axis Controllers series and is designed for wall mounting. It features a 16/32-bit MC68376 processor, 24 digital inputs and outputs, and supports communication via Profibus DP and RS232. The controller offers 4 voltage and 4 current analog inputs, 4 voltage and 2 current analog outputs, and has a power consumption of 8 Watts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SYHNC100-NIB-2X/W-24-P-D-E23-A012 is a digital axis controller manufactured by Bosch Rexroth Indramat and grouped within the VT-HNC Digital Axis Controllers series. The unit serves as the central motion and I/O coordinator for hydraulic or electro-hydraulic drives, translating command sequences from higher-level PLCs into precise valve or pump actuation. By combining signal conditioning, processing, and fieldbus communication in a single wall-mounted module, it simplifies cabinet layouts and reduces wiring in industrial automation cells.
Eight analog inputs are available—four voltage channels and four current channels—so transducers for pressure, position, or force can be connected without external converters. Corresponding analog outputs supply four voltage and two current signals for proportional valve control. Field communication with central controllers occurs over the Profibus DP interface, while discrete machine states are captured through a bank of 24 In / 24 Out digital points. For local service or diagnostic laptops, an RS232 port is provided. All voltage-mode sources are referenced to ±10 V, and incoming sensor levels are digitized with a fine resolution of 5 mV, allowing tight closed-loop regulation.
Real-time execution is handled by a 16/32-Bit MC68376 microcontroller that combines CPU, timer units, and a CAN coprocessor on one die to shorten control cycles. Total power draw is only 8 W, minimizing panel heat load and enabling direct operation from low-capacity control transformers. Each transistorized switching output can deliver up to 50 mA, enough to drive relay coils or optical isolators without external amplifiers. Automatic sensor calibration follows the HR1000/HR2000 routines, simplifying setup after transducer replacement. The wall-mounting enclosure keeps PCB traces away from hydraulic fluid spray and frees DIN-rail space for auxiliary breakers and terminal blocks.
Frequently Asked Questions about SYHNC100-NIB-2X/W-24-P-D-E23-A012:
Q: How many analog inputs are available on the SYHNC100-NIB-2X/W-24-P-D-E23-A012 controller?
A: The SYHNC100-NIB-2X/W-24-P-D-E23-A012 supports four voltage analog inputs and four current analog inputs.
Q: What bus interface is provided on the SYHNC100-NIB-2X/W-24-P-D-E23-A012?
A: This model is equipped with a Profibus DP bus interface for network communication.
Q: How many digital I/O points does the SYHNC100-NIB-2X/W-24-P-D-E23-A012 offer?
A: There are 24 digital inputs and 24 digital outputs available on this controller.
Q: What is the voltage input resolution of the SYHNC100-NIB-2X/W-24-P-D-E23-A012?
A: The voltage input resolution for this controller is 5 mV, providing fine measurement increments.
Q: Which sensor calibration methods are supported by the SYHNC100-NIB-2X/W-24-P-D-E23-A012 controller?
A: Sensor calibration can be performed using HR1000 or HR2000 standards on this unit.
