SYHNC100-NIB-23W-24-P-D-E23-A012 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat SYHNC100-NIB-23W-24-P-D-E23-A012 is part of the VT-HNC Digital Axis Controllers series and features a digital closed-loop control type with power consumption of 8 watts. It has a DP Profibus bus connection, supports 24 digital inputs and outputs, and is designed for wall mounting. The controller uses a MC68376 processor and includes a serial RS232 interface with a 9.6 KBaud serial baud rate.
Internal Product Review
The SYHNC100-NIB-23W-24-P-D-E23-A012 is a Bosch Rexroth Indramat digital axis controller with digital closed-loop control and DP Profibus connectivity. Wall-mount installation and 24 input/output capacity support efficient panel integration and flexible machine interfacing. Calibrated support for HR1000 and HR2000 inductive position sensors is a strong advantage for precise feedback applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SYHNC100-NIB-23W-24-P-D-E23-A012 is a digital axis controller produced by Bosch Rexroth Indramat and distributed within the VT-HNC Digital Axis Controllers series. Designed as the central unit in electrohydraulic positioning loops, it coordinates valve commands and feedback signals to maintain accurate motion profiles in industrial automation applications. The unit runs internal algorithms for spool-valve control, position synchronization, and load compensation in presses, molding machines, and test rigs. Its integrated control capabilities allow it to manage hydraulic motion without requiring a separate processor for the primary control calculations.
It interfaces with plant networks through PROFIBUS DP, allowing the controller to exchange setpoints and diagnostic data in real time. A digital closed-loop control structure runs on a 32-bit MC68376 processor, which handles position, velocity, and pressure algorithms without an external coprocessor. The module provides 24 input/output terminals, allowing sensors and solenoid commands to be wired directly to the board. The electronics consume only 8 W at the nominal supply, which limits heat generation inside the cabinet. Parameter files are edited with the WIN-PED programming tool, providing access to control values and operating settings. The inductive position channel is precalibrated for HR1000 and HR2000 transducers, reducing the need for field scaling when these compatible feedback devices are connected.
The wall-mount housing measures 192 mm deep, 155 mm high, and 106.5 mm wide, allowing the controller to fit in shallow enclosures. Four mounting holes, each 4.5 mm in diameter, align the unit on a back panel and provide secure attachment to the mounting surface. Runtime data can be accessed through an RS-232 port that operates at 9.6 kbaud, supporting reliable point-to-point communication with a connected computer. Because the serial connection is buffered, tuning parameters can be adjusted while PROFIBUS messaging continues without interruption. The compact enclosure allows multiple axis controllers to be installed in the same cabinet while preserving space for wiring, communication lines, and adjacent control equipment.
