VT-HMC-2-1X/M-P-00/00 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901361303
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HMC-2-1X/M-P-00/00 belongs to the VT-HMC Digital Axis Controllers series and is designed to control two axes. It features 8 analog inputs with 14-bit resolution, 4 analog outputs with 16-bit resolution, and supports 8 digital inputs and 4 digital outputs. The controller operates on a nominal voltage of 24 VDC, mounts on a DIN rail, and has an IP20 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HMC-2-1X/M-P-00/00 is a compact digital axis controller produced by Bosch Rexroth Indramat within the VT-HMC Digital Axis Controllers series. Installed in machine cabinets, it supervises motion on hydraulic or electric actuators by processing field feedback and issuing drive commands. In this role, the unit coordinates multiple control loops, allowing automated equipment to achieve repeatable positioning, velocity, and pressure profiles. It is suitable for motion-control applications in presses, test benches, and general material-handling systems.
Power is supplied at 24 VDC and protected by a 3.15 A time-delay input fuse. Eight analog inputs are digitized at a 14-bit resolution, while four analog outputs provide a 16-bit resolution for regulating proportional valves. The analog outputs support loads down to 1,000 ohms in voltage mode or 500 ohms in current mode. The controller also provides eight digital inputs and four transistor outputs, with each transistor output capable of sourcing 50 mA. Servo error is recalculated every 0.5 ms, supporting responsive closed-loop control. The enclosure has an IP20 rating and is intended for installation inside a closed control cabinet. The 24 V supply permits ripple of up to 5 V peak to peak over a frequency range from 40 Hz to 400 Hz. Parameter sets can be edited through the Ethernet port, and the housing clips directly onto a DIN rail for cabinet installation.
The controller stores and restores data on an SD memory card, allowing parameter files and updates to be transferred through removable media. It accepts cards with capacities up to 4 GB through an SPI interface. The device controls two closed-loop axes, allowing one module to coordinate a master axis and a follower axis without additional control hardware. Stored parameters can be archived with relevant device data for later use. The aluminum housing weighs 0.64 kg, keeping the module light enough for compact DIN-rail assemblies. Analog and digital channels remain available while a memory card is installed, so data acquisition and command functions can continue during normal card access.
Frequently Asked Questions about VT-HMC-2-1X/M-P-00/00:
Q: How many axes can the VT-HMC-2-1X/M-P-00/00 axis controller manage?
A: The VT-HMC-2-1X/M-P-00/00 controller supports two controlled axes for motion control applications.
Q: How many analog inputs does the VT-HMC-2-1X/M-P-00/00 feature?
A: This model provides 8 analog inputs, each with a resolution of 14 bits.
Q: What is the number and resolution of analog outputs on the VT-HMC-2-1X/M-P-00/00?
A: Four analog outputs are available on this controller, supporting a 16-bit output resolution.
Q: What is the supported SD card capacity for backup or restoration in the VT-HMC-2-1X/M-P-00/00?
A: An SD memory card with a maximum capacity of 4 GB can be used for backup and restore functions.
Q: How is the VT-HMC-2-1X/M-P-00/00 controller installed?
A: The VT-HMC-2-1X/M-P-00/00 mounts onto DIN rails for installation in control cabinets.
