VT-HMC-1-10/M-P-00/00 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901361305
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HMC-1-10/M-P-00/00 belongs to the VT-HMC Digital Axis Controllers series and features 4 analog inputs with 14-bit resolution and 2 analog outputs with 16-bit resolution. This controller has 4 digital inputs, 2 digital outputs, and supports an encoder input frequency of 250 kHz. It operates at a nominal voltage of 24 VDC and has IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HMC-1-10/M-P-00/00 is an electronic axis controller produced by Bosch Rexroth Indramat for the VT-HMC Digital Axis Controllers series. The board mounts on a DIN rail inside machine control panels and drives proportional hydraulic valves or servo amplifiers by processing field feedback and host commands. Through integrated analog, digital, and encoder interfaces, it forms the real-time link between a PLC and the hydraulic actuator in automated production equipment.
I/O processing begins with four analog input channels that are sampled at 14-bit resolution, allowing fine discrimination of pressure or position transducer signals. Two analog outputs offer a 16-bit command depth, so valve currents or external drives can be adjusted in small increments. When the outputs operate in current mode, they can drive loads up to 500 Ω, while voltage mode supports loads of at least 1000 Ω. The controller also accepts differential encoder signals up to 250 kHz, ensuring high-speed position capture without missed edges. Four optically isolated digital inputs and two digital outputs share the same deterministic task cycle, which completes in only 0.5 ms and provides predictable reaction times for interlock or limit functions.
The logic is powered from a nominal supply of 24 VDC, and the board withstands residual bus ripple of 5 Vpp without functional loss. Overcurrent protection for the installation is provided by an external 3.15 A time-delay fuse. The IP20 protection class indicates that live parts are finger-safe, but the device must be placed inside an enclosure in environments with dust or moisture. Dedicated sensor and encoder power rails deliver 100 mA and 300 mA, respectively, so transducers can be powered directly from the card. Two additional digital inputs monitor fuse or pressure switches, while the remaining analog pair can be assigned to temperature or flow probes. These available channels support the signals required for single-axis hydraulic positioning.
Frequently Asked Questions about VT-HMC-1-10/M-P-00/00:
Q: What is the analog input resolution on the VT-HMC-1-10/M-P-00/00 axis controller?
A: The VT-HMC-1-10/M-P-00/00 features a 14-bit resolution for its analog inputs.
Q: How many digital inputs does the VT-HMC-1-10/M-P-00/00 provide?
A: This controller has a total of four digital input channels available for signal acquisition.
Q: What is the maximum encoder input frequency for the VT-HMC-1-10/M-P-00/00 controller?
A: The encoder input frequency supported by this model is up to 250 kHz.
Q: What is the required nominal voltage for operating the VT-HMC-1-10/M-P-00/00?
A: The nominal supply voltage for the VT-HMC-1-10/M-P-00/00 is 24 VDC.
Q: What protection class does the VT-HMC-1-10/M-P-00/00 conform to?
A: This product is rated to protection class IP20, which covers standard indoor installations.
