VT-HACD-DCC-2X-V2-1-C-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R978000405
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HACD-DCC-2X-V2-1-C-0 is part of the VT-HACD Digital Axis Controllers series and is equipped with a 32-bit PowerPC processor. This controller offers 6 analog inputs, 3 analog outputs, 9 digital inputs, and 8 digital outputs, with a maximum digital output current of 20 mA. It operates at a current consumption of 200 mA at 24 VDC and features IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HACD-DCC-2X-V2-1-C-0 is a programmable axis controller produced by Bosch Rexroth Indramat within the VT-HACD Digital Axis Controllers series. The card is intended to regulate hydraulic or servo axes by converting reference commands into precise valve currents or drive voltages while collecting position feedback for closed-loop motion tasks in automated machinery. This arrangement supports repeatable positioning and stable control response in machines that rely on fast electronic correction. Because command processing and feedback evaluation are combined on one card, the controller fits compact motion systems where coordinated axis behavior is required.
At its core, a 32-bit PowerPC processor executes control algorithms and interpolation routines. The board offers 6 differential analog inputs, each with an input resistance of 200 kΩ ±5%, allowing direct connection of pressure or position sensors without significant loading. Voltage measurements are digitized with a resolution of 5 mV, while current signals are captured at 5 µA per step to maintain fidelity in low-level transducer outputs. Command signals to external devices are delivered through eight transistor outputs that can source up to 20 mA each, and incremental encoder channels accept edge rates up to 250 kHz so high-speed position feedback is retained. A stabilized reference of +10 V ±25 mV is also available for sensor excitation.
Three analog outputs deliver valve commands with a resolution of 1.25 mV at 14-bit or 1.25 µA in current mode, giving fine control over proportional actuators. The module monitors 9 opto-isolated digital inputs for reference marks, homing, or safety chains and supplies 3 programmable analog outputs to companion drives, while the discrete outputs total eight points. Absolute feedback via SSI is handled at 28-bit data width, complementing incremental encoders when loss-of-power position retention is required. Total current drawn from the 24 Vdc rail remains below 200 mA, and the IP20 enclosure rating allows the card to be mounted on DIN rail inside a ventilated cabinet without additional sealing.
Frequently Asked Questions about VT-HACD-DCC-2X-V2-1-C-0:
Q: How many analog inputs are available on the VT-HACD-DCC-2X-V2-1-C-0 controller?
A: This model has 6 analog input channels, enabling multiple signal sources to be connected simultaneously.
Q: What is the maximum output current for the digital outputs on the VT-HACD-DCC-2X-V2-1-C-0?
A: The digital outputs can each handle a maximum current of 20 mA.
Q: What is the maximum frequency supported for incremental encoder inputs?
A: It supports incremental encoder signals up to 250 kHz, allowing for high-speed position feedback.
Q: What processor type does the VT-HACD-DCC-2X-V2-1-C-0 use?
A: A 32-Bit PowerPC processor is used in this controller for device operations.
Q: What is the protection class of the VT-HACD-DCC-2X-V2-1-C-0?
A: This controller carries an IP20 protection class rating, indicating limited protection against solid objects but no water ingress protection.
