VT-HACD-B-1-1X-V0-1-0-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901007449
Ask for AvailabilityThe Bosch Rexroth Indramat VT-HACD-B-1-1X-V0-1-0-0 is a digital axis controller from the VT-HACD Digital Axis Controllers series. It features a 24 VDC operating voltage, supports command signal inputs of 0 to 20 mA or 4 to 20 mA, and 0 to 10 V or ±10 V. The controller uses a 64-pin card edge connection, includes a display and keys on the front interface, and supports SSI position sensors.
Internal Product Review
The VT-HACD-B-1-1X-V0-1-0-0 is a Bosch Rexroth digital axis controller with a display-and-keys front interface for efficient setup and adjustment. Support for SSI position sensors and an RS 232 serial interface makes commissioning and feedback handling especially practical in motion applications. A regulated pulsed current valve output stage with 24 VDC operation gives the unit precise axis control and dependable integration.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HACD-B-1-1X-V0-1-0-0 is a digital axis controller produced by Bosch Rexroth Indramat within the VT-HACD Digital Axis Controllers series. It mounts in a Eurocard rack and supervises proportional hydraulic valves in multi-axis machinery. By interpreting external command references and sensor data, the card adjusts valve current in real time to support closed-loop control of position, velocity, or force. Because the control loop is closed on the card, the machine can respond quickly to changing load conditions and commanded motion profiles. Its control functions also support synchronized motion between axes, including master-slave operation, cam profiling, and pressure-controlled transitions often used in presses, molding machines, and general automation lines.
The controller follows the Eurocard form factor with a card height of 100 mm and a width of 160 mm, complying with DIN 41494. This layout suits standardized rack systems and keeps the controller aligned with common backplane spacing used in industrial cabinets. A front display and keys provide local parameter navigation, so routine setup changes can be made directly at the module. Command inputs accept 0 to 20 mA and other common current or voltage reference signals, allowing the card to interface with many PLC output types. A selectable linear or quadratic brake characteristic shapes deceleration ramps, while an S-component start ramp helps smooth acceleration and reduce abrupt hydraulic response.
The module runs from a single 24 VDC supply and plugs into the rack through a 64-pin card edge connector. It can retransmit process values as current loops or ±10 V signals to external recorders or slave drives, which helps pass axis status to other control devices. The retransmitted signals also let supervisory controls monitor axis behavior without adding a dedicated signal converter. Feedback is accepted from SSI position transducers, and a built-in RS-232 port supports configuration software for parameter uploads and diagnostic readout. This combination lets one rack card handle command processing, feedback evaluation, and valve drive functions without relying on separate interface amplifiers.
