VT-HACD-1-1X-V0-1-C-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901119881
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HACD-1-1X-V0-1-C-0 is part of the VT-HACD Digital Axis Controllers series and operates at a voltage of 24 VDC with a supply range from 21 V to 35 V. It provides 6 analog inputs, 3 analog outputs, 9 digital inputs, and 8 digital outputs, and features a CANopen bus interface. The controller has a 2 millisecond sampling time and uses a 64-pin DIN 41612 Form G connection type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HACD-1-1X-V0-1-C-0 is a plug-in digital axis controller card manufactured by Bosch Rexroth Indramat within the VT-HACD Digital Axis Controllers series. Installed in a Eurocard rack or stand-alone backplane, the card conditions command signals and feedback data so that hydraulic or electric motion axes follow setpoints with closed-loop accuracy. In industrial automation, it acts as the intermediary between machine control layers and the actuators, translating high-level commands into precise analog or digital outputs suitable for proportional valves, servo drives, or transducers.
Signal processing is handled by 6 analog inputs that accept sensor feedback and by 3 analog outputs used for valve or drive commands. Discrete control is handled through 9 digital inputs and eight digital outputs, enabling limit switch monitoring and on/off sequencing. Fieldbus integration is provided through CANopen, while local setup and diagnostics can be performed through the RS232 serial port. The module occupies a 100 × 160 mm Eurocard footprint and plugs into a 64-pin DIN 41612 Form G connector for power, I/O, and bus lines. Control loops are refreshed every 2 ms, and internal protection is supported by a 4 A slow-acting fuse mounted on the card.
The power domain is centered on a nominal 24 VDC supply, with the design tolerating input limits from 21 V to 35 V so machinery can remain functional during moderate line variations. In idle mode, the electronics draw only 250 mA, reducing cabinet heat when axes are parked. Command scaling references a symmetrical ±10 V range, allowing direct connection to most industrial transducers and proportional amplifiers without additional conditioning. The module’s voltage window and fuse coordination help protect both upstream power supplies and the precision circuitry used for its high-speed control loops.
Frequently Asked Questions about VT-HACD-1-1X-V0-1-C-0:
Q: How many analog input channels are available on the VT-HACD-1-1X-V0-1-C-0?
A: The VT-HACD-1-1X-V0-1-C-0 controller features 6 analog input channels for signal processing.
Q: How many analog outputs does the VT-HACD-1-1X-V0-1-C-0 offer?
A: This model provides 3 analog output channels for controlling external devices.
Q: Which bus interface does the VT-HACD-1-1X-V0-1-C-0 use?
A: The VT-HACD-1-1X-V0-1-C-0 supports CANopen as its bus interface for communication.
Q: What type of fuse does the VT-HACD-1-1X-V0-1-C-0 use?
A: This controller is equipped with a 4 A slow-blow fuse for circuit protection.
Q: What is the operating voltage of the VT-HACD-1-1X-V0-1-C-0 controller?
A: The VT-HACD-1-1X-V0-1-C-0 operates at a supply voltage of 24 VDC.
