VT-HACD-1-1X-V0-1-0-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900745354
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
24 Seconds
The Bosch Rexroth Indramat VT-HACD-1-1X-V0-1-0-0 is part of the VT-HACD Digital Axis Controllers series and features 6 analog inputs, 3 analog outputs, 9 digital inputs, and 8 digital outputs. This controller operates with a 24 VDC supply voltage, has a card size of 100 by 160 mm, and supports a serial interface via RS-232.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HACD-1-1X-V0-1-0-0 is a plug-in digital axis controller card from Bosch Rexroth Indramat, supplied within the VT-HACD Digital Axis Controllers series. It is intended for closed-loop regulation of hydraulic or electric drives, where it calculates position, velocity, and pressure commands and outputs a control voltage to the associated power stage. The board conforms to the 100 × 160 mm Eurocard format, enabling direct insertion into a system rack that uses a 64-pin DIN 41612 Form G backplane connector, so no additional wiring harness is required during installation.
The controller operates from a nominal 24 VDC supply and draws an idle current of 250 mA; upstream protection is provided by a 4 A slow-acting fuse. A reference stage supplies ±10 V for proportional valve or drive command signals, and internal computations are refreshed every 2 ms, matching the sampling time of the embedded PID loops. The incremental encoder channel accepts edge frequencies up to 100 kHz, allowing high-resolution feedback without loss of counts. Parameters and diagnostics are exchanged through a RS-232 serial interface, while up to 32 local bus cards can share data across the rack segment. Application logic is stored in 32 program blocks that are selected through software rather than hardware jumpers, streamlining field updates. The card’s 64-pin connector routes all analog, digital, and bus lines so the specified housing dimensions remain unchanged even when every channel is populated.
For machine I/O, the board provides 6 differential analog input channels and 3 analog outputs that follow the internal reference range. Nine opto-isolated digital inputs accept PNP sensor signals, and 9 transistor outputs drive solenoids or relays up to 24 V at moderate current; a further bank of 8 digital outputs supplies status bits for indicators or interlocks. These channel counts allow a single VT-HACD card to supervise an axis with multiple limit switches, pressure transducers, and valve coils without external expansion, keeping cabinet space and wiring complexity to a minimum.
Frequently Asked Questions about VT-HACD-1-1X-V0-1-0-0:
Q: How many analog input channels are available on the VT-HACD-1-1X-V0-1-0-0?
A: The VT-HACD-1-1X-V0-1-0-0 controller offers six analog input channels.
Q: What connector type is used on the VT-HACD-1-1X-V0-1-0-0 axis controller?
A: This controller features a 64-pin DIN 41612 Form G connector for interface connections.
Q: What supply voltage does the VT-HACD-1-1X-V0-1-0-0 require?
A: The supply voltage required for operation is 24 VDC.
Q: How many program blocks are supported by the VT-HACD-1-1X-V0-1-0-0?
A: You can operate up to 32 program blocks with this controller.
Q: Which serial interface is present on the VT-HACD-1-1X-V0-1-0-0 controller?
A: The serial interface provided on this model is RS-232.
