VT-HACD-1-16/V0/1-0-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900745354
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HACD-1-16/V0/1-0-0 is part of the VT-HACD Digital Axis Controllers series. It has a card size of 100 by 160 mm and operates at 24 VDC with a mass of 0.2 kg. The controller offers a maximum solenoid current of 2.5 A and features a 64-pin DIN 41612 Type G bus connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HACD-1-16/V0/1-0-0 is a plug-in digital axis controller card produced by Bosch Rexroth Indramat for the VT-HACD Digital Axis Controllers series. Installed in Eurocard racks of hydraulic power units, the board supervises proportional or servo valve operation and executes closed-loop control algorithms for position, force, and speed. By converting fieldbus or analog command values into regulated solenoid currents, it links the machine-level PLC to electrohydraulic motion stages found in presses, test stands, and general automation lines. Its rack-mounted format keeps motion control functions inside the hydraulic electronics assembly, which reduces the need for separate interface hardware.
The card operates from a regulated supply of 24 VDC and draws up to 250 mA at idle, while solenoid demand can peak at 2.5 A. Sensor feedback enters through an analog current input with 100 Ω resistance, and process commands return through an analog current output that can drive 500 Ω loads. Digital status lines are limited to 30 mA per channel, and a positional reference of ±10 V is available for external devices. Fast internal execution is supported by a sampling interval of 2 ms, allowing the controller to refresh control loops within typical hydraulic response times. Connections to the cabinet backplane are routed through a 64-Pin DIN 41612 Type G connector, and the Eurocard footprint measures 100 x 160 mm for direct insertion into standard IEC 60297 sub-racks.
Drive excitation for LVDT and other transducers is produced by an oscillator running at 5.7 kHz with an amplitude of 13 Vss, which supports stable demodulation inside the signal conditioning channels. The board’s voltage output channel resolves control steps down to 1.25 mV, helping the controller issue small command changes when a hydraulic axis approaches its target. A 4 A Slow-Blow fuse protects the 24 V rail, and the fully assembled card weighs only 0.2 kg, so it can be inserted into a rack without adding much load to the card guides. The excitation circuit and analog output stage let displacement sensors and valve electronics be processed on the same board instead of through separate interface modules.
Frequently Asked Questions about VT-HACD-1-16/V0/1-0-0:
Q: What is the required supply voltage for the VT-HACD-1-16/V0/1-0-0 digital axis controller?
A: The VT-HACD-1-16/V0/1-0-0 operates with a 24 VDC supply voltage for its controller functions.
Q: What is the maximum solenoid current supported by the VT-HACD-1-16/V0/1-0-0?
A: This model supports a maximum solenoid current of 2.5 A, suitable for high-power valve control applications.
Q: What is the voltage resolution on the Ao1 output of the VT-HACD-1-16/V0/1-0-0 controller?
A: The output voltage resolution on the Ao1 channel is 1.25 mV, enabling precise analog control.
Q: What type of bus connector does the VT-HACD-1-16/V0/1-0-0 use?
A: A 64-Pin DIN 41612 Type G bus connector is provided for industrial compatibility and modular installation.
Q: What type and rating of supply fuse does the VT-HACD-1-16/V0/1-0-0 controller require?
A: The supply fuse specified for this unit is a 4 A slow-blow fuse, ensuring protection against current surges.
