VT 5024-17b Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
33 Seconds
The VT 5024-17b IO card operates on 24 V DC with a current consumption rated at 0.6 A and features a swivel angle command input of ±10 V with resistance over 50 kΩ. As part of the VT-5000 IO Cards series by Bosch Rexroth Indramat, it boasts a 32-pin male multi-point connector and compact Euro-card dimensions of 100 x 160 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the VT 5024-17b. The card is compatible with typical industrial power supplies where variations are common by this voltage range. The card can operate without harm within the strict limits of 35 V top and 21 V bottom. These limits are to preserve the integrity of the integrated circuits and prevent thermal runaway which can occur when there is a high current due to voltage spikes. The power required for the card’s internal operations and signal processing is reflected in its current consumption of 0.6 A with a max of 1.25 A. The power dissipation of the card is closely related to its current consumption and must be controlled to avoid overheating and ensure stability. For accurate control, the input signal parameters for swivel angle and pressure commands are crucial. With an input resistance greater than 50 kΩ, the pressure command input (psoll) and swivel angle command input (swsoll) both work in the 0 to 10 V range.
Bidirectional control is possible by the ±10 V range for the swivel angle real input (swist), which is required for applications that need precise placement. Closed loop control is possible by the analog real value input for pressure (pist). The output stage is used to drive hydraulic valves and other electromechanical devices since it drives solenoid currents between 1.8 A and 2.2 A. The actuator's speed and force are affected by load resistances like 5.4 Ω or 10 Ω, which control the output stage’s current and power dissipation. The output signal’s rate of change is determined by the ramp time, which can be 30 ms to 1 s or 5 s. This parameter is important to control mechanical systems' acceleration and deceleration to avoid sudden motion that can cause damage. An oscillator frequency of 2.5 kHz ±10% is used for signal generation and internal timing.
This frequency stability is crucial for reliable and consistent operation. For external sensors or devices, the regulated voltage of ±9 V ±1% with a max load of ±25 mA ensures a stable power supply, reduces noise and ensures data transfer. Also important are the connector and physical size. With its 100 x 160 mm, the Euro-card format is easy to mount in standard industrial racks. The 32-pin male multi-point connector (DIN 41 612, form D) reduces signal loss and interference and ensures safe and reliable electrical connections. For rack-mounted systems, the front panel dimensions are standardized 3 HE (128.4 mm) high and 1 TE and 7 TE wide. The card is designed to withstand severe industrial conditions with an operating temperature range of 0 °C to 50 °C and a storage temperature range of -25 °C to +85 °C.
