VT 5012 S32
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The VT 5012 S32 IO card features a 32-pin male multi-point connector, operates on 24 V DC with a tolerance of +40%/-5%, includes LED indicators for operational readiness, and weighs just 0.15 kilograms. Part of the VT-5000 IO Cards series by Bosch Rexroth Indramat, it supports an adjustable ramp time of 30 ms to approximately 5 seconds.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 5012 S32 from Bosch Rexroth Indramat is part of the VT-5000 IO Cards designed for advanced industrial automation needs.
The controller integrates a high-quality 32-pin male connector system that matches DIN 41 612 D standard to deliver dependable industrial linkups. The VT 5012 S32 IO card consistently meets Euro-card standards at 100 by 160 mm since it can match system dimensions. It functions in three HE-level front panel (128.4 mm) and two TE-level connections (5.08 mm and 7 TE). The system works well from 0 °C up to 50 °C, and its 0.15 kg weight makes installation and upkeep effortless. The 24 V DC card operates across a large voltage spectrum and adjusts automatically to different power sources within +40% / -5% tolerance. With the system able to adjust ramp times between 30 milliseconds and 1 second through 5 seconds (+/-20%), this parameter enables strong input reaction speed management. The output stage accepts different solenoid loading demands through two power configurations. Models deliver either 1.8 A ±20% at 5.4 Ω or 2.2 A ±20% at 10 Ω.
The VT 5012 S32 has built-in circuits that run at a maximum 1.5 kHz self-clock speed and generate an accurate 2.5 kHz oscillator signal (within 10% tolerance). The mechanism supplies ±9 volts that remains within 1% accuracy to any connected device with an external load of up to 25 milliamps. The card produces electrical signals through "w" and "x" analog outputs, which range from 0 to 7.6 V and 0 to 6.6 V, respectively, while maintaining 100 Ω impedance. This device includes dual LED lights to show status and has jumper settings plus a control knob to let you fine-tune ramp time and commands.
Frequently Asked Questions about VT 5012 S32:
Q: What is the operating voltage range for the VT 5012 S32?
A: The VT 5012 S32 operates with a 24 V DC input across a broad voltage spectrum, adjusting to power sources within a +40% / -5% tolerance.
Q: How does the VT 5012 S32 manage different loading demands?
A: The output stage offers two power configurations, delivering either 1.8 A at 5.4 Ω or 2.2 A at 10 Ω, each with a ±20% variance to accommodate various solenoid loading demands.
Q: What are the frequency and timing capabilities of the VT 5012 S32?
A: It features a built-in circuit that runs at a maximum self-clock speed of 1.5 kHz and generates a 2.5 kHz oscillator signal within a 10% tolerance, allowing precise control over automation timing.
Q: What are the physical dimensions and operational conditions of the VT 5012 S32?
A: The VT 5012 S32 adheres to Euro-card standards, measuring 100 x 160 mm and fitting into a three HE-level front panel (128.4 mm) with two TE-level connections. It functions effectively from 0 °C to 50 °C.
Q: How does the VT 5012 S32 facilitate monitoring and control adjustments?
A: It produces electrical signals through "w" and "x" analog outputs, ranging from 0 to 7.6 V and 0 to 6.6 V, respectively, with a 100 Ω impedance for precise monitoring. Dual LED lights indicate status, and adjustable jumper settings and a control knob allow for fine-tuning of ramp times and command inputs.
