VT 5008 S16 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
52 Seconds
The Bosch Rexroth Indramat VT 5008 S16 is part of the VT-5000 IO Cards series and operates with a 24 VDC input and a power consumption under 50 VA. It features command inputs of ±9 V and ±10 V, a 32-pin male DIN 41612 connector, and supports a maximum solenoid current of 2.2 A with a fuse rating of 2.5 A T.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 5008 S16 is an input/output card developed by Bosch Rexroth Indramat for the VT-5000 IO Cards series. Designed to slide into a modular electronics rack, the board supplies reference voltages, accepts analog command signals, and switches power to hydraulic valve solenoids in automated machinery. Within Rexroth hydraulic control racks, it interfaces with proportional pressure, flow, and directional valves to maintain accurate and repeatable motion control. Its rack-mounted design combines signal processing and valve control functions on a single board.
The card operates from a system supply of 24 VDC and draws less than 2 A during normal operation, keeping the total apparent power below 50 VA. Overcurrent events are limited by a replaceable 2.5 A T fuse mounted on the board. Field wiring terminates on a 32-pin DIN 41612 form D male connector, allowing the card to connect to the backplane without disturbing individual field conductors. Five differential command channels accept analog control signals from the connected system. The fifth channel accepts up to ±10 V, while channels one through four accept signals within ±9 V. An internal regulator supplies a stable ±9 V reference for downstream signal conditioning, and the output circuit can energize valve coils with a resistance of 10 Ω at room temperature.
Before the output stages activate, the enable pin must exceed 8.5 V, preventing unintended motion during power-up. Once enabled, the driver can deliver up to 2.2 A to a proportional solenoid. The power output supports the specified 10 Ω valve coil, while a separate switching relay uses a 2150 Ω coil. The relay closes at 16.8 V and drops out at 2.4 V, providing clear switching hysteresis between its active and inactive states. For position feedback, the board excites an LVDT transducer at 2.5 kHz and supports sensor currents up to 30 mA. This excitation circuit allows the card to process position signals transmitted through typical machine-length cables.
