VT 5006-17 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
39 Seconds
The VT 5006-17 is produced by Bosch Rexroth Indramat as part of the VT-5000 IO Cards series. This card has a size of 100 x 160 mm and uses a 32-pin DIN 41612 Form D connector. It operates at 24 VDC with a fuse rating of 2.5 A and supports a maximum solenoid current of 2.2 A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 5006-17 is an I/O card produced by Bosch Rexroth Indramat for the VT-5000 I/O Cards series. Installed in a rack-based control cabinet, the board supplies conditioned analog signals and drive current so that proportional hydraulic valves and associated transducers can be integrated into automated machinery. By converting a direct-current supply into regulated outputs and pulse-width-modulated coil drive, the card acts as an interface between a PLC and field devices that require precise current or voltage control.
The card is powered from a nominal input of 24 VDC and operates when the supply remains between the lower limit of 22 V and the upper limit of 35 V. Internally, it generates a balanced reference of ±9 V ±1% and provides a regulated output current of ±25 mA for sensors. The coil driver is clocked by an oscillator running at 2.5 kHz ±10% and provides closed-loop current regulation. Enable logic is recognized when the control line rises above 8.5 V, and it becomes inactive below 6.5 V, permitting consistent start and stop sequences. Inputs 1 through 4 accept a full-scale range of ±9 V. A maximum transducer load of 30 mA prevents overcurrent on the feedback channels. Supply overcurrent protection is provided by a 2.5 A time-delay fuse.
The board conforms to the Eurocard format and measures 100 × 160 mm. It connects to the backplane through a 32-pin DIN 41612 Form D connector, providing the electrical interface for power, control signals, and field connections. A solenoid resistance of 10 Ω is assumed for load sizing, and the drive stage can source a peak current of 2.2 A ±20% without exceeding component limits. The board has a mass of 0.15 kg, which reduces the load placed on card guides in panels exposed to vibration. Its compact format allows the module to occupy a standard rack position alongside compatible control and amplifier cards. The regulated drive stage supports proportional valve control by maintaining the commanded coil current as the connected load changes during operation.
