VT-3006 S30 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
0 Seconds
The Bosch Rexroth Indramat VT-3006 S30 is part of the VT 3000 Analog Amplifiers series and operates at 24 VDC with a maximum solenoid current of 800 mA. This amplifier features a 32-pin DIN 41612 Form D connection and measures 100 x 160 mm. It supports command inputs of ±9 V and has a biasing current of 20 mA.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-3006 S30 is an analog amplifier card produced by Bosch Rexroth Indramat within the VT 3000 Analog Amplifiers series. Mounted in a control-cabinet rack, the card converts low-level command voltages from a machine controller into regulated current for proportional solenoids that actuate hydraulic or pneumatic devices. This interface allows precise adjustment of actuator force or spool position without mechanical linkage changes, supporting closed-loop motion and pressure control in automated installations.
The amplifier runs on a nominal supply of 24 VDC, while protective circuitry keeps operation between the 22 V lower limit and the 39 V upper limit and drops the relay when the rail falls to 16.8 V. An onboard 2.5 A T fuse guards the input against accidental short circuits. The physical format follows the Eurocard profile of 100 × 160 mm, and the edge contacts mate with a 32-pin DIN 41612 Form D connector for a secure rack connection. Command channels accept differential signals up to ±9 V and feed a high-impedance network that presents 100 kΩ to the source, minimizing the load on PLC analog outputs. Internal reference regulators produce ±9 V for sensor excitation or test points, and the card can source or sink ±25 mA to external loads without drift because of its stabilized output stages.
Current conditioning for the field device includes a bias circuit that delivers 20 mA to stabilize the magnetizing force before modulation starts. The pulse-width generator operates at 170 Hz, providing a responsive control signal for the connected load. Under dynamic demand, the power stage can deliver up to 800 mA into a coil with a rated resistance of 19.5 Ω, allowing the valve to reach full stroke without saturation. A 5 kΩ measuring socket provides nonintrusive current monitoring during setup and maintenance.
Frequently Asked Questions about VT-3006 S30:
Q: What is the operating voltage required for the VT-3006 S30 analog amplifier?
A: The Bosch Rexroth Indramat VT-3006 S30 operates on a nominal voltage of 24 VDC.
Q: What is the maximum solenoid current output of the VT-3006 S30?
A: This model supports a maximum solenoid current of 800 mA.
Q: What is the command input voltage range for the VT-3006 S30?
A: The VT-3006 S30 accepts command inputs ranging from ±9 V for inputs 1 to 4.
Q: What type of connection interface does the VT-3006 S30 use?
A: It features a 32-pin DIN 41612 Form D connection type for secure interfacing.
Q: What is the fuse rating on the VT-3006 S30 analog amplifier?
A: The VT-3006 S30 is designed with a fuse rated at 2.5 A T for circuit protection.
