Product Description:

The VT3002-2X/64G is an analog amplifier card produced by Bosch Rexroth Indramat and supplied within the VT 3000 Analog Amplifiers series. VT3002-2X/64G slides into standardized control racks to condition proportional valve signals, converting low-level controller outputs into repeatable drive currents that move hydraulic actuators in presses, forming lines, and general machinery. Its onboard electronics allow precise gain and damping settings so motion stages respond predictably even when supply conditions fluctuate. Stable current regulation also helps hydraulic axes react smoothly to command changes, which is important in machines that depend on repeatable spool movement and controlled pressure buildup.

The board follows the single Euro-format, so its height, length, and 32-pin backplane arrangement match other process control modules. Signal exchange is routed through a backplane connector with 64 poles that complies with the DIN 41612 hardware standard, ensuring pin assignment compatibility across programmable logic controllers. Field wiring attaches to front-panel plug-in screw terminals; each terminal accepts conductors up to 4 mm², giving adequate cross-section for low-impedance sensor or solenoid loops. Output stages are rated for 3 A, enabling the card to drive most medium-size proportional valves without external boosters. Connector form G sets the contact row arrangement and helps keep insertion orientation clear when the module is fitted into a rack.

Mounting flexibility is supported by screw or hat-rail mounting; when rail mounting is used, the housing must be positioned vertically because the hat-rail orientation is limited to vertical only. A front latch uses lever actuation to secure the card, allowing quick extraction while maintaining vibration resistance inside the enclosure. The power distribution segment feeding the terminal strip can carry up to 48 VAC/DC, which covers common low-voltage machine supplies for auxiliary controllers and interlocks. This arrangement keeps connections accessible at the front of the module and supports orderly wiring in compact control cabinets.