VT3002-1-2X-32D Bosch Rexroth Indramat 32 Pin 4 Amp Analog Amplifier
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900020153
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT3002-1-2X-32D is part of the VT 3000 Analog Amplifiers series and features 32 plug-in screw terminals with a 32-pin socket connector compliant with DIN 41612. It supports a supply voltage of 24 V DC, a maximum terminal voltage of 48 VAC/DC, and can operate in ambient temperatures from -20 to 70 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT3002-1-2X-32D analog amplifier card is manufactured by Bosch Rexroth Indramat as part of the VT 3000 Analog Amplifiers series. Intended for installation in standardized control racks, the module interfaces between a 24-volt control supply and field valves, shaping setpoint values and collecting transducer feedback. By performing this signal processing, it supports precise flow or pressure control loops in hydraulic or pneumatic machinery used throughout automated production lines. This arrangement allows the card to convert low-level command signals into stable valve-driving outputs while also processing return signals needed for accurate closed-loop regulation.
Its wiring interface is organized for 32 field and power points that are landed on plug-in screw terminals linked internally to a 32-pin socket. That connector follows the DIN 41612 Form D standard, allowing quick exchange within backplanes built to the same footprint. The board follows the Single Euro-Format outline, so its front edge mates with card guides while the rear contacts slide into a motherboard. Logic and valve solenoids are supplied from a stabilized bus of 24 V DC, and each conductive path is rated for up to 4 A, allowing the amplifier to drive multiple proportional coils without overheating. Even-numbered pins on rows a and c are reserved for signals, which helps keep the internal connection pattern orderly. The standardized layout also supports consistent alignment inside compatible rack systems.
In control enclosures, the card fastens to a hat rail by either screw or snap clips, so it can be removed without disturbing adjacent electronics. Field wiring up to 4 mm² can be clamped in the terminal block, and external circuits may carry as much as 48 VAC or 48 VDC relative to common. Reliable operation is specified from -20 °C to 70 °C, covering cold-start and elevated ambient conditions commonly found near hydraulic power units. The module’s mass of 0.5 kg keeps loading on lightweight panel hardware low. This combination of mounting and wiring features helps the card fit neatly into compact industrial control cabinets where space and routing access are limited.
Frequently Asked Questions about VT3002-1-2X-32D:
Q: How many connections are supported on the VT3002-1-2X-32D amplifier?
A: The VT3002-1-2X-32D supports a connection count of 32, enabling up to 32 channels for signal or power routing.
Q: What type of connection terminals are used in the VT3002-1-2X-32D?
A: This model uses plug-in screw terminals for secure and convenient wiring connections.
Q: Which connector type and standard does the VT3002-1-2X-32D use?
A: The amplifier is equipped with a 32-pin socket, form D, compliant with the DIN 41612 standard.
Q: What supply voltage does the VT3002-1-2X-32D analog amplifier require?
A: The amplifier operates at a supply voltage of 24 V DC for standard functionality.
Q: What is the maximum ambient temperature allowed for the VT3002-1-2X-32D amplifier?
A: This device can handle a maximum ambient temperature of 70 °C, supporting reliable performance in higher temperature settings.
