VT 3013 S35 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat VT 3013 S35 belongs to the VT 3000 Analog Amplifiers series and has a weight of 0.15 kg. It operates with a power supply voltage of 24 VDC ±10% and a fuse rating of 2.5 A. The amplifier provides a maximum output current of 800 mA and supports a maximum coil resistance of 19.5 ohms.
Internal Product Review
The VT 3013 S35 is a Bosch Rexroth Indramat analog amplifier with a 24 VDC ±10% supply and 30 W power requirement. A differential input of 10 V and maximum output current of 800 mA support precise signal handling and dependable valve actuation. A strong choice for stable, efficient analog control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 3013 S35 is an analog amplifier card produced by Bosch Rexroth Indramat within the VT 3000 Analog Amplifiers series. The board converts low-level control signals into regulated solenoid current so that a proportional hydraulic valve can follow electronic commands in automated machinery. This function supports controlled pressure, flow, or actuator movement when the card is paired with a compatible valve and hydraulic circuit. The card occupies seven rack divisions and fits behind an eight-division faceplate, allowing direct insertion into standardized card frames used in machine tools and press controls.
The module operates from a regulated supply of 24 VDC ±10% and draws up to 30 W during operation. It accepts a differential input of 10 V for the main command channel and a separate control input of ±9 V for trimming the output stage. Output current is adjustable from a minimum of 20 mA to a peak of 800 mA, allowing the card to operate proportional coils with resistance up to 19.5 Ω. A test socket referenced to 0 V uses a scale of 1 mV per 1 mA, allowing coil current to be checked without opening the circuit. For stable signal conditioning, the card provides an input resistance of at least 500 Ω to the upstream controller.
Primary circuit protection is provided by a 2.5 A fuse that isolates the card when a supply fault occurs. A secondary summing port accepts an additional command of ±6 V, allowing remote bias or ramp signals to modify the output without interrupting the main reference. The circuit layout uses a standardized 5.08 mm grid, which provides uniform connector spacing and alignment with adjacent modules in the card frame. The power stage regulates current during extended valve commands to help prevent excessive thermal loading in the connected winding. The assembly weighs 0.15 kg, minimizing the mechanical load placed on the card guides and rack structure.
