VT 3002-21-48F Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The VT 3002-21-48F is manufactured by Bosch Rexroth Indramat as part of the VT 3000 Analog Amplifiers series. This model uses a single Euro-format card and features a DIN 41612 interface standard with a 48-contact layout in Form F. It supports a maximum terminal voltage of 48 VAC/DC and a current capacity of 4 Amps, and can be mounted vertically using a screw or hat rail method.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 3002-21-48F is a plug-in connection board produced by Bosch Rexroth Indramat for use with modules in the VT 3000 Analog Amplifiers series. Installed in a control cabinet, the board provides a fixed wiring interface so amplifier cards can be swapped without disturbing field conductors. This arrangement helps keep cabinet wiring orderly in automated machinery and process lines while reducing the need to rework external connections.
This model follows the Single Euro-Format card outline, so its height and depth match standard 100 mm × 160 mm rack guides. It brings out signals through 48 contacts arranged in the Form F layout, and each circuit can carry up to 4 A. Mating edges comply with the DIN 41612 back-plane standard, allowing direct insertion into sub-racks that use the same connector family. Internally, the board uses three labeled rows, D, B, and Z, to separate power, analog, and logic paths, while an even-numbered pin scheme simplifies cross-reference with schematic callouts. External wiring lands on a socket connector that accepts plug-in screw terminals, so field cables can be terminated without soldering and the entire harness can be removed as a single piece when required.
The board is rated for a maximum terminal potential of 48 VAC/DC, which matches common control voltages in valve and sensor loops. Feed conductors up to 4 mm² can be clamped, giving ample cross-section for low-voltage power distribution. Each panel cutout supports hardware with a 4.2 mm mounting hole, and a lever actuation latch locks the mating connector to resist vibration. Hat rail installation is permitted only in a vertical orientation, and the assembly may also be fastened directly with screws when rail space is unavailable. These mounting options let the card fit different enclosure layouts while maintaining the clearances required by control-cabinet standards.
Frequently Asked Questions about VT 3002-21-48F:
Q: What type of terminal style is featured on the VT 3002-21-48F amplifier?
A: This model uses plug-in screw terminals for convenient and secure electrical connections.
Q: What is the maximum terminal voltage capacity for the VT 3002-21-48F?
A: The VT 3002-21-48F supports a maximum terminal voltage of 48 VAC/DC.
Q: What card format does the VT 3002-21-48F use?
A: This unit is designed with a single Euro-format card size.
Q: Which interface standard does the VT 3002-21-48F comply with?
A: The amplifier features a DIN 41612 interface standard for connectivity.
Q: What is the allowed hat rail orientation for mounting the VT 3002-21-48F?
A: This model can only be oriented vertically when mounted on a hat rail.
