VT 3002-1-20/64G Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat VT 3002-1-20/64G is part of the VT 3000 Analog Amplifiers series and features a 64-pin DIN 41612 connector form G with plug-in screw terminals. It supports a maximum current capacity of 3 Amps and a terminal voltage up to 48 VAC or DC. The device can be vertically mounted on a hat rail and weighs 0.5 kg.
Internal Product Review
The VT 3002-1-20/64G is a socket connector for VT 3000 analog amplifiers, featuring a 64-pin interface and DIN 41612 compatibility. Plug-in screw terminals and lever actuation make wiring and service work especially efficient in control cabinet applications. Vertical hat rail mounting supports clean installation, making this connector a dependable choice for organized analog amplifier integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 3002-1-20/64G is a plug-in connector module manufactured by Bosch Rexroth Indramat for the VT 3000 Analog Amplifiers series. It serves as the field interface for signal and low-power supply lines that connect a VT 3000 amplifier to sensors, actuators, and control wiring inside an automation cabinet. By providing a prearranged socket that mates with the amplifier card, the unit simplifies installation and maintains orderly wiring in electrohydraulic and general motion-control applications.
Inside the molded housing, a DIN 41612 backplane connector arranges four contact rows labeled F, D, B, and Z. The mating side has a 64-pin socket with an even-numbered pinout, allowing channels to be traced directly from the amplifier edge to the plug-in screw terminals. Each circuit is rated for 3 A, and the board supports line or control potentials up to a maximum of 48 VAC/DC, matching the low-energy requirements of proportional valves and feedback sensors. Mounting hardware can be secured to the panel frame with screws or snapped into position without tools, and the complete assembly has a mass of only 0.5 kg, which reduces the load placed on lightweight support members.
The connector uses mechanical keying identified as form G, which prevents accidental insertion into positions intended for adjacent amplifier boards. Once positioned on a 35 mm rail, the module locks in a vertical-only orientation, ensuring that the signal markings on the terminal strip align with the cabinet drawings. Field conductors with cross-sectional areas up to 4 mm² can be inserted without ferrules, and a captive clamping bar applies pressure when the screw is turned. A lever-actuated release disengages the socket from the amplifier in a single motion while leaving the panel wiring undisturbed, providing direct access to the amplifier card when needed.
