VT 3002-1-20/48F Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900020154
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
34 Seconds
The Bosch Rexroth Indramat VT 3002-1-20/48F is part of the VT 3000 Analog Amplifiers series and features a current carrying capacity of 4 Amps with a maximum terminal voltage of 48 VAC or VDC. It uses DIN 41612 socket standard, has plug-in screw terminals, and allows for either screwable or snappable mounting. The amplifier weighs 0.5 kilograms and supports a max connection cross-section of 4 mm².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 3002-1-20/48F is an analog amplifier carrier manufactured by Bosch Rexroth Indramat for the VT 3000 Analog Amplifiers series. It accepts a plug-in amplifier card and provides field wiring points, creating a compact interface between hydraulic control electronics and cabinet conductors. By combining the socket, terminals, and rail hardware in one body, the unit simplifies installation and access inside automated machinery that relies on proportional valve actuation. The carrier also organizes connections in a single location, reducing the amount of separate mounting hardware needed within the control cabinet.
The conductor path is rated at 4 A, allowing the module to feed solenoid or sensor loops without excessive heat buildup. The plug-in screw terminals are insulated for up to 48 VAC/DC, so the same base can accommodate either DC control circuits or low-voltage AC feedback lines. The terminals accept wires up to 4 mm², providing enough capacity for leads selected according to circuit length and current requirements. The assembly weighs 0.5 kg, which limits the mechanical load placed on the supporting rail. Signal boards plug into a DIN 41612 connector with D, B, and Z rows, providing the required contact arrangement for compatible Rexroth VT 3000 cards. A rising-cage terminal mechanism holds conductors firmly when nearby pumps, valves, and pipes transmit vibration through the cabinet. Hinged clamps provide access to the conductor openings while keeping the wiring points organized.
The housing clips onto the rail in a vertical orientation and releases through lever actuation, allowing front access in a crowded panel. Two mounting holes positioned for 35 mm rail centers accept hardware with a diameter of 4.2 mm when a fixed bracket is preferred. Its screw-on or snap-on mounting supports either traditional fastening or tool-free rail engagement in retrofit frames. The organized terminal arrangement separates analog channels and return conductors to help preserve signal integrity during rapid pressure cycling. Front-facing access also allows conductors to be secured without removing adjacent control components. The compact carrier body leaves room for neighboring modules and cable-routing channels within densely arranged enclosures.
