Product Description:

The VEP50.4DEN-512NN-MAD-1G0-NN-FW is an embedded human-machine interface produced by Bosch Rexroth Indramat for the VEP Embedded Terminals series. It integrates a 32-bit processor, solid-state storage, and an industrial display inside a single housing, giving equipment builders a compact alternative to separate panel PCs and monitors. By mounting this terminal on a machine door or swing arm, maintenance staff can execute diagnostics, download recipes, and issue motion commands directly at the production cell, eliminating walks to remote control rooms and shortening downtime.

Powered from a 24 V DC control supply, the terminal draws only 50 W at full brightness, reducing heat inside the cabinet. Its 370 × 407 × 88 mm enclosure supports panel or arm mounting. The face incorporates a 15 in TFT that renders process graphics at 1024 × 768 pixels, and the capacitive Touch Screen lets operators navigate menus with gloved hands. Because production areas often require wash-down, the front bezel carries IP65 ingress protection, while the remaining sides are rated IP20 to facilitate convection cooling. Vibration-damped mounting clips prevent loosening during continuous duty on high-speed packaging lines.

Internal resources match the visualization role: 512 MB of application RAM pairs with 1 GB of non-volatile flash for program code and trend data, all managed by Windows CE 6.0. Two 2 × Ethernet TCP/IP ports enable segregation of machine and plant networks, and integrated switching simplifies daisy-chain wiring. Additional interfaces—2 × USB 2.0 for data logs or barcode scanners, 1 × RS232 for legacy drives, and two CompactFlash sockets for recipe storage—extend the device without external hubs. These communication and storage options complement the touch-enabled display and IP-rated construction described earlier.