Product Description:

The VEP30.4AON-512NN-MAD-1G0-NN-FW is an embedded operator terminal produced by Bosch Rexroth Indramat within the VEP Embedded Terminals series. As an HMI component, the unit integrates processing, I/O, and visualization so that machine builders can mount a single panel for status display and command entry. In an automation cell, it bridges PLC control and field devices, presenting process data on its integrated screen while the touch interface lets users acknowledge alarms, modify setpoints, and initiate controlled sequences.

Its visualization hardware centers on a 800 x 600 pixel resolution shown across a compact 8.4 in active area. The TFT panel pairs with the touchscreen interface, eliminating external keypads. Front exposure to dust or spray is limited by the IP65 rated bezel, whereas the rear electronics remain within an IP20 enclosure. Two CompactFlash sockets and two USB ports permit local recipe storage and service backups. During startup, the device draws an inrush of 7 A / 6 ms; after stabilization, its maximum steady-state input is 1.5 A. A ready contact is provided, rated 0.5 A at 30 V DC, for signaling controller availability to higher-level safety circuits.

Internal computing resources include a Intel Celeron 600 MHz processor coupled with 512 MB of RAM, giving the terminal adequate bandwidth for multi-screen graphics and diagnostics. The electronics are powered from a single DC 24 V source that simplifies cabinet wiring and aligns with common control power rails. Typical demand reaches only 36 W, so thermal output remains low enough for passive convection inside most sealed panels. The panel supports continuous visualization in packaging lines, assembly stations, and drive-based systems without requiring a separate industrial PC.