VEH30.2BNN-512ET-A2D-4G0-DS-E2-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911172224
The Bosch Rexroth Indramat VEH30.2BNN-512ET-A2D-4G0-DS-E2-FW is a handheld terminal from the VEH Handheld Terminals series, featuring an 8.4 inch TFT touch screen display and 36 foil function keys. It is equipped with an Intel Atom 1.1 GHz processor, 512 MB RAM, 4 GB flash memory, and has an IP65 protection rating. The terminal weighs 2.6 kilograms and operates at a supply voltage of 24 V DC with a 0.5 meter cable.
Internal Product Review
The VEH30.2BNN-512ET-A2D-4G0-DS-E2-FW is a Bosch Rexroth handheld terminal with an 8.4-inch TFT display. A 3-step dual enabling button arrangement and a 2-circuit stop button support safe, precise machine interaction. IP65 protection and an integrated handwheel make the terminal especially well suited for demanding setup and jog operations.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VEH30.2BNN-512ET-A2D-4G0-DS-E2-FW handheld terminal is produced by Bosch Rexroth Indramat and belongs to the VEH Handheld Terminals series. This mobile interface is intended for machine-side operation, giving personnel direct access to motion commands, diagnostics, and dual-channel emergency stop circuitry while standing within the work area. Two three-step enabling buttons, a separate two-circuit stop button, and an integral handwheel combine to support jog, teach, and maintenance modes in industrial automation cells where safe, localized control is required.
The front panel hosts an 21.3 cm (8.4") diagonal display that uses a TFT panel, so graphical status pages remain visible under varied shop-floor lighting. An Intel Atom processor running at 1.1 GHz manages screen updates and fieldbus communication while remaining within the device’s passive cooling envelope. System code and user pages reside in 4 GB of flash memory, and temporary variables are buffered in 512 MB of RAM to keep cycle times steady when large data sets are loaded. Thirty-six foil function keys, a multitouch overlay, and an override potentiometer let the operator adjust speed or axis values without returning to a fixed cabinet HMI.
Electrical power is supplied at 24 V DC; the terminal draws only 14 W, allowing it to be wired to the low-current auxiliary output of most control systems. All electronics are sealed to an IP65 protection rating, so dust and water jets cannot penetrate the housing during wash-down or metal-cutting operations. Despite the rugged enclosure, the unit weighs just 2.6 kg, reducing fatigue during prolonged use. A molded strain-relief carries the 0.5 m hybrid cable that routes power, Ethernet, and safety lines back to the control panel, keeping handling simple when the terminal is moved between robot stations. The handwheel, override knob, and touch screen remain fully functional even when the foil keys are engaged with gloved hands.
