Product Description:

The VEH30.2BNN-512ET-A2D-4G0-BS-E2-FW is a handheld operator terminal produced by Bosch Rexroth Indramat within the VEH Handheld Terminals series. It serves as a mobile human-machine interface, allowing maintenance staff and machine setters to interact directly with motion controllers and PLCs on the shop floor. The device consolidates display, input elements, and safety keys into a sealed housing so automation tasks can be commanded while standing next to the equipment.

The terminal’s computing section uses an Intel Atom 1.1 GHz processor that supports real-time visualization and control tasks. Operating data and recipes load quickly thanks to 512 MB of application RAM that pairs with 4 GB of onboard flash for nonvolatile storage. An 8.4 in diagonal panel constructed with TFT technology renders 256,000 colors, ensuring clear status graphics under factory lighting. To withstand coolant splash and dust, the housing carries an IP65 rating, and low-voltage operation is maintained from a 24 V DC supply fed through a protected internal converter. Two enabling buttons and a dedicated stop key are fitted for personnel safety, allowing motion to be released only while the operator maintains a positive grip.

Overall power draw is limited to 14 W, so the unit can be fed from a small auxiliary circuit without adding thermal load to the cabinet. The housing, measuring 240 × 250 × 80 mm, provides room for shielding yet remains comfortable for one-handed use, and the molded body plus a 0.5 m tethered cable allow secure operation near conveyors. Operators can issue commands through the virtual keyboard, leaving the front surface available for dynamic process graphics. At 2.8 kg, the terminal stays light enough for extended shifts while resisting accidental drops. Its portable layout supports use close to the machine, where the display and controls remain within easy reach during setup and routine operation.