Product Description:

The VEH30.2BNN-512ET-A2D-0.1OZ0-BS-E2-FW is a handheld operator terminal manufactured by Bosch Rexroth Indramat for the VEH Handheld Terminals series. It is intended for mobile machine control and diagnostic tasks on the factory floor. The terminal integrates a display, input keys, and required safety elements within a single enclosure. The housing is 290.54 mm tall and 270 mm wide, allowing operators to interact with automated equipment while moving around the machine.

Power is supplied by a 24 V DC line, with a steady current draw of 0.7 A and an inrush peak of 3 A. The electronics consume no more than 14 W, so the connected cabinet supply requires only modest reserve capacity. An Intel Atom Z510 processor running at 1.1 GHz executes the runtime environment, while 512 MB of RAM supports the graphical interface without paging delays. Nonvolatile storage includes 4 GB of flash memory for boot files, PLC projects, and operating logs. Network communication with controllers and drive systems is handled through an RJ45 10/100BASE-T port that automatically negotiates the link speed. Forty tactile operating keys support axis selection, numeric entry, and software-assigned functions. The enabling switch is rated for 100,000 cycles, and the emergency stop button is rated for 250,000 cycles, providing documented operating-life values for the safety controls.

Process values and setup dialogs appear on an 8.4-inch color TFT that remains legible under factory lighting. The molded case has an IP65 rating when the front connector is engaged, preventing dust ingress and withstanding low-pressure water spray during washdown. With a mass of 2.6 kg, the device is light enough for extended handheld operation while remaining stable during use with a retractable cable. Rear strain-relief points direct cable weight away from the circuit board, and corner bumpers reduce the transfer of incidental impacts to the display.