Product Description

The VDP16.2AKN-G4-NN-NN operator display is produced by Bosch Rexroth. It is one of its several VDP series of terminals. This product can be used with a control cabinet PC that has a G4 display interface to operate as a PC-based operator terminal. This device can be mounted on a bracket that has little mounting depth. It is possible to connect two units to the control cabinet PC with a Y-repeater. This display has a chance of getting damaged if it is not operated with the manufacturer-specified components, accessories, and cables. The product can be used with paper converting and printing machines.

The device must always be installed in the position indicated and operated under the ambient conditions indicated. The unit is designed to work between 5°C and 45°C. Its components are in compliance with multiple EN standards. The UL, CSA, and CE conformities of the product become void if it is modified. The brightness of the LCD backlight of the product goes down by 50% after its service lifespan of 40,000 hours. The screen readability of the device is reduced if there is direct exposure to sunlight or UV light. The mounting surface of the unit should be flat and have mechanical strength.

The mechanics of this device may get damaged because of incorrect mounting torque. The time interval for turning OFF the backlight of the product is adjustable according to the user’s preference. The four LEDs indicate the status of the power supply voltage, UPS, HDD, and operating temperature. The Power LED is in OFF mode when there is no 24VDC supply voltage and lights up in green in the normal mode. The screen must be cleaned every week using an alcohol-based cleansing agent or an antistatic fabric. The operator display can be sent to any address globally with a one-year Wake Industrial warranty.