Product Description:

The VDP92.1DEN-G5-NN-S1 is an operator interface panel produced by Bosch Rexroth Indramat for the VDP IndraControl Panels series. It combines a graphic TFT display with onboard I/O so one device can present process data and send control signals inside an automation cell. Intended for machine-level visualization, the panel links to IndraControl PLCs through common fieldbus networks used in packaging, conveyor, and assembly equipment, giving operators local access to parameters, alarms, and command keys. Because the display and signal handling are integrated in one housing, it can support local monitoring and control without a separate operator station.

The unit is powered from a nominal 24 V DC supply and draws up to 2 A max during startup or backlight switching. Its 15 in display delivers a native resolution of 1024 × 768 px, and the color depth reaches 256,000 shades for clear process graphics. Type 1 input classification indicates the panel’s surge immunity on the DC bus, and the supply also feeds two high-side transistor outputs that source 24 V at 0.2 A each for pilot lamps or contactor coils. Sixteen digital inputs and eight sourcing digital outputs exchange discrete signals with sensors or interlocks. A single USB connector supports peripherals that draw up to 500 mA, and the LED backlight is rated for 30,000 hours before it reaches half brightness.

Environmental limits support continuous operation with an IP54-protected front, allowing washdown splashes without enclosure modifications. The panel withstands vibration up to 1 g and shock loads up to 15 g during operation. Installation is permitted at altitudes up to 2000 m without derating, and an external pass-through supports sensor supply for connected field devices. The front sealing also helps protect the display area from dust and splashing liquids in routine industrial use.