Product Description:

The VDP82.1NJN-C1-NN-EN is an operator terminal from Bosch Rexroth Indramat that belongs to the VDP IndraControl Panels series. It is used in industrial automation to present process data and accept touch or key commands for machine control. The panel integrates display electronics, connection hardware, and environmental sealing so that it can be mounted on electrical enclosures or arm systems inside a production cell.

The screen renders graphics at a resolution of 640 x 480 pixels, making it suitable for vector objects, alarm lists, and detailed diagnostics. A diagonal size of 26 cm (10.4 in) offers enough surface for multi-window layouts while keeping the housing compact. Color depth reaches 262,144 colors, allowing meaningful status coding and gradient backgrounds without banding. Control power is supplied from a 24 V DC ±20% source, and this low-voltage input simplifies wiring inside cabinets that already distribute safety extra-low voltage. The internal electronics draw a nominal operating current of 0.3 A, which minimizes heat generation and permits the use of lighter conductors.

Ingress protection on the machine side is rated at IP54, so dust deposits and water splashes cannot reach the front keys or display surface, while the rear section meets IP20 for sheltered cabinet interiors. The LED backlight is rated for 50,000 hours of service, delaying maintenance schedules in continuous-duty lines. A shielded digital interface can span up to 10 m between the panel and the industrial PC, giving flexibility in placing the controller away from vibration or contamination zones. When mounted, the unit withstands vertical or horizontal oscillations up to 0.5 G, and all signal grounds can be tied into a protective earth conductor with a minimum cross-section of 2 mm².