VDP82.1FKN-C1-NN-EN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912005309
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
11 Seconds
The Bosch Rexroth Indramat VDP82.1FKN-C1-NN-EN is part of the VDP IndraControl Panels series and features a 10.4 inch a-Si TFT Active Matrix display with a resolution of 640 by 480 pixels. The panel supports 262,144 display colors, includes a USB1A interface and 1394 data exchange port, and operates at a nominal input of 24 V DC with a nominal current of 0.3 A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VDP82.1FKN-C1-NN-EN operator panel is produced by Bosch Rexroth Indramat as part of the VDP IndraControl Panels series. The unit combines a graphic display and low-voltage electronics so that machine controllers can present status data and receive operator commands directly at the installation site. Its role in industrial automation is to act as a human-machine interface that links IndraDrive or PLC modules to on-machine pushbuttons, recipes, and diagnostic screens. Operators can view alarms, machine status, and process prompts directly at the point of use instead of relying on a separate cabinet display.
Electrical input is supplied through a 2-pin connector with a 3.5 mm pitch and operates at 24 V DC with a nominal current of 0.3 A. This power level supports the internal logic and the backlight during normal operation. The panel uses an a-Si TFT active-matrix screen that measures 26 cm (10.4 in) diagonally and provides a usable display area of 211.2 × 158.4 mm. Visual information is rendered at a native resolution of 640 x 480 px, so alarm text, menus, and graphics remain easy to read from normal operating distances. The cold-cathode backlight is rated for 50,000 h of service, which supports long operating schedules. A USB1A receptacle on the housing allows file transfer through the panel without opening the enclosure.
To withstand shop-floor environments, the aluminum front bezel carries a protection rating of IP54, which helps block dust and water splashes during normal machine use. The rear housing is rated IP20 because it is intended to remain inside a cabinet after installation. Process data can be exchanged with higher-level controllers through a 1394 serial bus, giving the panel fast access to motion or I/O variables. Color depth reaches 262,144 shades, allowing clearer separation of status icons, trend lines, and screen elements during diagnostics. This layout suits panel-mounted operation where the display faces the operator while the rear section remains protected inside the machine enclosure.
Frequently Asked Questions about VDP82.1FKN-C1-NN-EN:
Q: What is the display size and area of the VDP82.1FKN-C1-NN-EN panel?
A: The VDP82.1FKN-C1-NN-EN panel features a 10.4-inch display size, providing a display area of 211.2 x 158.4 mm.
Q: How many display colors does the VDP82.1FKN-C1-NN-EN panel support?
A: This panel supports 262,144 display colors for high-quality image representation.
Q: What is the display resolution of the VDP82.1FKN-C1-NN-EN panel?
A: The resolution of the VDP82.1FKN-C1-NN-EN is 640 x 480 pixels.
Q: What levels of front and rear protection does the VDP82.1FKN-C1-NN-EN offer?
A: The front of the VDP82.1FKN-C1-NN-EN has IP54 protection, while the rear has IP20 protection.
Q: What data exchange and USB ports are available on the VDP82.1FKN-C1-NN-EN panel?
A: A USB1A interface and a 1394 data exchange port are both available on this panel.
