VDP80.1FGN-C1-NN-EN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911172168
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
13 Seconds
The Bosch Rexroth Indramat VDP80.1FGN-C1-NN-EN is a control panel from the VDP IndraControl Panels series, featuring an 8.4-inch a-Si TFT active matrix display with a resolution of 640 x 480 pixels and support for 262,144 colors. It offers 24-bit digital inputs and 16-bit digital outputs, runs on a 24 V DC nominal input, and weighs 2.6 kilograms. The panel includes a 25-pin handwheel connector and comes with data and USB cable lengths of 10 meters and 3 meters respectively.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VDP80.1FGN-C1-NN-EN panel is manufactured by Bosch Rexroth Indramat and belongs to the VDP IndraControl Panels series. It functions as an operator interface that mounts near machinery so personnel can visualize process data and invoke commands directly from the production floor. The unit combines a thin-film transistor display with onboard electronics and input terminals to relay status information to the controller and accept user selections for routine machine adjustments.
The front screen measures 21 cm (8.4 in) diagonally, giving the panel a compact footprint while providing an active area of 170.88 × 128.16 mm for clear graphics. Its native resolution of 640 × 480 pixels pairs with 262,144 colors to present detailed diagnostic views and multicolor alarms without dithering. The panel operates from a regulated 24 V DC supply and requires only 2 A of nominal current, permitting installation on low-power 24 V control rails. An a-Si TFT active-matrix display keeps response times uniform across the screen and minimizes image retention in continuous-duty applications. The 10 m data cable option allows placement at a distance from the drive cabinet while sustaining full video and touch responsiveness.
Signal exchange with the automation platform is handled through 24 bits of digital input and 16 bits of digital output, so discrete sensors and lamp stacks can be wired without additional interface modules. The backlight is rated for 50,000 h, supporting multi-shift operation before brightness begins to decline. A 25-pin handwheel connector is provided for manual jog functions, and the recommended ground conductor has a 2 mm² cross-section to maintain EMC compliance. The enclosure weighs 2.6 kg, which supports use on articulated-arm mounts. A 3.0 m USB lead supports flash data transfers, and the device current is limited to 500 mA.
