Product Description:

The VDP60.3FEN-D1-UA-NN belongs to the VDP IndraControl Panels series from Bosch Rexroth Indramat. It functions as a 19-inch touchscreen operator terminal for machine-level visualization and command entry. Installed on a cabinet door or swing arm, the panel presents process states on the display, accepts operator inputs through its projected-capacitive surface, and relays data to the controller for local HMI operation. This format allows machine status, alarms, and command screens to remain available directly at the point of use.

The unit is powered from a regulated supply range of 19 V DC to 30 V DC, which allows headroom for voltage drops along field wiring while staying below SELV limits. During operation, it draws roughly 40 W, so enclosure thermal calculations can treat the panel as a light electronic load. The aluminum front complies with IP65, protecting the TFT display and touch sensor from dust and low-pressure water jets when mounted flush. A diagonal of 19 in paired with a native resolution of 1280 × 1024 yields a 5:4 aspect ratio that presents detailed graphics without scaling artifacts, which is useful for diagnostics screens and fine motion profiles.

Ambient operation is permitted from +5 °C to +45 °C with relative humidity from 5% to 85%, allowing installation in typical control rooms without additional conditioning. When the machine is idle, storage tolerates temperatures from -20 °C to +60 °C, which helps protect stored units during seasonal temperature swings. Five USB ports accommodate service keyboards, barcode readers, or memory sticks, while a single CDI serial interface links the panel to the host PC. Mechanical depth is 62 mm, and the housing measures 483 mm wide by 400 mm high to match 19-inch rack openings and keep panel layouts consistent across the VDP range.