Product Description:

The VDP60.3FEN-D1-NN-NN is a human-machine interface unit manufactured by Bosch Rexroth Indramat in the VDP IndraControl Panels series. Installed on the front of a control cabinet, it combines graphical feedback and command entry so operators can supervise axes, temperatures, and diagnostics directly at the machine. The panel communicates with drives and PLCs over the dedicated CDI link, eliminating separate video or keyboard cables and simplifying wiring inside automated production cells.

A 48.3 cm (19") TFT display forms the visual core of the panel, delivering a native resolution of 1280 x 1024 pixels for detailed process graphics. Color rendering reaches 16 million colors, which supports clearly differentiated status symbols and trend charts. Touch operation replaces mechanical keys, reducing moving parts and allowing an unbroken front membrane that achieves IP65 ingress protection against dust and low-pressure water jets. The light-gray housing in RAL 7035 matches standard control-cabinet shades and accepts panel-mount clamps without additional adapters. One front USB port and four rear USB ports connect service sticks, scanners, or backup drives, while the single CDI serial interface links the unit to the IndraControl system. All electronics are powered from a 24 V DC supply, permitting direct connection to common cabinet power buses without internal AC conversion.

Electrical draw is limited to 40 W, minimizing heat dissipation so the unit can share space with temperature-sensitive modules. For factory environments subject to transport impacts, the housing withstands shocks up to 15 g and continuous vibration of 1 g. These mechanical ratings help maintain touchscreen calibration and prevent loose connectors. Overall mass is 7.3 kg, allowing single-person installation and reducing stress on swing-arm mounts. The panel's internal design keeps component spacing tight enough to resist resonance while still leaving room for the 1 x CDI board and the USB backplane.