Product Description:

The VDP60.3ARN-D1-NN-NN is an operator panel produced by Bosch Rexroth Indramat for the VDP IndraControl Panels series. It serves as a human-machine interface that relays commands and status data between machine operators and automation controllers through its single CDI communication port. By integrating display, touch sensing, and control wiring in one unit, the panel reduces cabinet complexity and provides a dedicated visualization point on assembly lines, packaging stations, and motion platforms. Because the interface is concentrated in a single panel, the control system can present operating states, faults, and setpoint entry on one screen instead of spreading them across separate devices.

The front face hosts a 48.3 cm (19") display that presents graphics at a native resolution of 1280 × 1024. With a palette of 16 million colors, it can show detailed process imagery and alarm icons clearly. The underlying screen technology is TFT, which supports stable luminance across the large viewing area and helps maintain contrast when the panel is mounted overhead. Interaction is carried out through touch operation, allowing function keys and navigation areas to be created in software rather than by fixed hardware. The front bezel has a depth of 62 mm, so the device fits shallow enclosures, and the 7.3 kg chassis supports the internal display and control electronics.

The panel draws a maximum of 40 W from a nominal 24 V DC supply, which simplifies integration with standard low-voltage control power. A sealed aluminum front provides IP65 protection when the unit is flush-mounted in a cabinet door, helping block dust and water jets from reaching the operating surface. The mechanical rating includes shock resistance up to 15 g and vibration endurance of 1 g, so the display remains suitable for presses, gantries, and other machinery exposed to repeated movement. That combination also supports use near reciprocating equipment where periodic shock and vibration can otherwise shorten display life or disturb touch accuracy. The protected front is intended for the machine-facing side, while the rear section is typically enclosed inside the cabinet.