Product Description:

The Bosch Rexroth Indramat VDP40.3DFN-D2-NN-NN belongs to the VDP IndraControl Panels series and serves as a front-end human-machine interface in automated equipment. Its TFT screen and membrane keys give operators both graphical feedback and tactile control, allowing parameter entry, alarm acknowledgment, and process visualization directly on the machine. By combining display, input, and industrial protection, the panel reduces wiring distance to the controller and shortens diagnostic time on assembly lines, packaging systems, and motion platforms.

This panel is powered from a nominal 24 V DC supply and draws only 1.05 A, so standard control-cabinet power buses can feed it without separate converters. Internal electronics dissipate 25 W of heat, which helps limit enclosure temperature rise and support component life. The 15-inch TFT produces a native resolution of 1024 × 768 px, giving a 4:3 aspect ratio suited to legacy SCADA layouts, while its palette of 16.7 million colors supports detailed process graphics. A total USB budget of 1 A is available for barcode readers or memory sticks, and each port is limited to 500 mA to protect upstream circuitry. The touch-and-key operation mode lets users alternate between finger gestures and dedicated pushbuttons, maintaining usability in gloved environments.

For plant-floor exposure, the aluminum front bezel carries an ingress rating of IP65, blocking dust and low-pressure water jets, whereas the rear housing is graded at IP20 because it mounts inside a cabinet. The active area measures 15 inches diagonally, and the front panel spans 407 mm in width and 370 mm in height with a mounting depth of 41 mm, so retrofit into shallow doors is possible. Total mass is 5.8 kg, which helps simplify mounting. Wiring follows IEC 24 V control practices to minimize voltage drop over modest cable runs.