Product Description:

The VDP40.3AUN-D2-NN-NN belongs to the VDP IndraControl Panels series produced by Bosch Rexroth Indramat. It functions as a compact operator panel that links motion controllers and PLCs, giving operators direct access to visualization and command functions on the factory floor. Because the control logic remains in the connected automation hardware, the panel serves primarily as a local display and input point rather than a standalone controller. This arrangement supports status viewing, alarm acknowledgment, and menu navigation close to the machine. By combining touch input with the CDI+ link, the panel simplifies installation in distributed automation cells and keeps core control hardware inside protected cabinets.

The panel operates from a regulated 24 VDC source, and its internal electronics draw only 35 W, minimizing demand on auxiliary power supplies. A front bezel rated at IP65 prevents dust ingress and low-pressure water jets from reaching the display area, allowing mounting on cabinet doors and machine fronts. Reliable function is maintained up to 45 °C ambient temperature, provided airflow is present, while humidity can rise to 85 % without condensation. Startup is permitted from 5 °C and 5% relative humidity after overnight shutdowns. The single CDI+ interface carries power, video, and touch data over a shielded cable, and the unit does not include an auxiliary interface.

A rear housing rating of IP20 assumes placement inside an enclosure, and the rear section is intended for protected installation rather than exposed use. Mechanical resilience is stated for shocks up to 15 g and continuous vibration of 1 g, which supports use on equipment with regular motion and impact loads. Operation continues at elevations reaching 3000 m, where lower air density can reduce convective cooling. Storage is allowed between -20 °C and 60 °C, helping protect the panel during shipment or long-term storage.