VDP15.3GAN-D1-NN-CN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911173263
The Bosch Rexroth Indramat VDP15.3GAN-D1-NN-CN is part of the VDP IndraControl Panels series and features a 15.6 inch TFT display with a resolution of 1366 x 768. This panel weighs 4.8 kilograms, has a multi-touch interface, and offers IP65 front protection with an overall IP20 rating. It operates with a 24 V DC power supply and 24 W power consumption, and includes two USB ports and one CDI serial interface.
Internal Product Review
The VDP15.3GAN-D1-NN-CN is an IndraControl panel with a 15.6-inch TFT display that delivers clear HMI visualization. IP65 front protection and multi-touch operation make the unit well suited for demanding machine interfaces. A 1366 x 768 resolution further supports crisp operator graphics and rounds out a very capable panel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VDP15.3GAN-D1-NN-CN is a human-machine interface panel manufactured by Bosch Rexroth Indramat within the VDP IndraControl Panels series. It serves as the operator front end for PLC-based motion or process lines, combining graphical feedback with touch input so users can issue commands, monitor alarms, and adjust parameters directly at the machine. As an integrated panel, it mounts on the cabinet door and relays data over the CDI link to the control cabinet, reducing wiring complexity.
The panel features a 39.6 cm (15.6″) diagonal screen that uses a TFT back-lit matrix for clear imaging. Its native resolution is 1366 × 768, allowing detailed visualization of trend graphs, diagnostics, and machine status. A projected-capacitive multi-touch surface recognizes up to five concurrent points, letting users perform drag, zoom, and context selections without mechanical keys. The electronics draw 24 V DC from the system power bus and typically consume 24 W, so thermal load inside the enclosure remains low. Communication to the control hardware is handled through one CDI serial channel, while two USB host ports permit keyboard, storage, or barcode reader attachment. Mechanical depth is limited to 56.5 mm, and the bezel spans 422 mm in width and 275 mm in height, enabling direct retrofit into standard 19-inch door cutouts.
The aluminum front carries an IP65 seal against dust and low-pressure water jets, while the rear electronics zone is rated IP20 to simplify cabinet ventilation. The housing withstands shocks up to 15 g and continuous vibration of 1 g, helping protect the display electronics during punching, milling, or press operations. At 4.8 kg, the unit remains manageable during panel mounting without special lifting equipment. Its fanless design helps keep airborne debris from entering the panel during maintenance.
